P64xx input leads: Difference between revisions
Jump to navigation
Jump to search
ElectroRents (talk | contribs) m (sorted lead set list by part number) |
ElectroRents (talk | contribs) mNo edit summary |
||
Line 4: | Line 4: | ||
Original input lead sets were | Original input lead sets were | ||
* 012-0386-00 − ten individual leads | |||
* 012-0556-00 − diagnostic leads to connect [[P6460]] to diagnostic test points and test pattern generator outputs of [[1240]]/[[1241]] logic analyzers | * 012-0556-00 − diagnostic leads to connect [[P6460]] to diagnostic test points and test pattern generator outputs of [[1240]]/[[1241]] logic analyzers | ||
* 012-0655-01 − ten individual 40 cm leads | * 012-0655-01 − ten individual 40 cm leads | ||
Line 10: | Line 11: | ||
* 012-0747-00 − standard 10-wire 10 in/25 cm with pluggable probe tips | * 012-0747-00 − standard 10-wire 10 in/25 cm with pluggable probe tips | ||
* 012-0800-00 − 10-wire 10 cm | * 012-0800-00 − 10-wire 10 cm | ||
* 012-0926-00 − 20 twisted pair leads. Possibly provided with [[P6455]], [[P6456]] and [[P6457]] pattern generator probes. | |||
* 012-0987-00 − ten individual leads [[P6460]] | |||
* 012-0989-00 − 10-wire 5 in/12 cm with pluggable probe tips | * 012-0989-00 − 10-wire 5 in/12 cm with pluggable probe tips | ||
* 012-0990-00 − 2 pin interface to single grabber | |||
* [[012-1000-00]] − diagnostic lead set for the [[P6452]] logic probe. | * [[012-1000-00]] − diagnostic lead set for the [[P6452]] logic probe. | ||
* [[012-1053-00]] − 16 twisted pair plus | * [[012-1053-00]] − 16 twisted pair leads plus 2 grabbers for [[P6452]] | ||
* [[103-0209-00]] − 2 x ten bundled leads connecting to a standard [[GPIB connector]] ,to be used with two probes. Supplied with the [[DF2]] | * [[103-0209-00]] − 2 x ten bundled leads connecting to a standard [[GPIB connector]], to be used with two probes. Supplied with the [[DF2]] | ||
As the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch, | As the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch, |
Revision as of 20:51, 26 January 2022
Logic probes from the Tektronix P64xx series share a common 10-lead input connector layout.
These probes include the P6406, P6407, P6408, P6450, P6451, P6452, P6455, P6460, P6462, A6701 and possibly others.
Original input lead sets were
- 012-0386-00 − ten individual leads
- 012-0556-00 − diagnostic leads to connect P6460 to diagnostic test points and test pattern generator outputs of 1240/1241 logic analyzers
- 012-0655-01 − ten individual 40 cm leads
- 012-0655-02 − ten individual 8 cm leads
- 012-0670-00 − ten individual 16 cm leads
- 012-0747-00 − standard 10-wire 10 in/25 cm with pluggable probe tips
- 012-0800-00 − 10-wire 10 cm
- 012-0926-00 − 20 twisted pair leads. Possibly provided with P6455, P6456 and P6457 pattern generator probes.
- 012-0987-00 − ten individual leads P6460
- 012-0989-00 − 10-wire 5 in/12 cm with pluggable probe tips
- 012-0990-00 − 2 pin interface to single grabber
- 012-1000-00 − diagnostic lead set for the P6452 logic probe.
- 012-1053-00 − 16 twisted pair leads plus 2 grabbers for P6452
- 103-0209-00 − 2 x ten bundled leads connecting to a standard GPIB connector, to be used with two probes. Supplied with the DF2
As the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch, it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
Instructions
Pictures
-
P6408 with 012-0747-00 harness and clips
-
Using P64xx probes with jumper wires