P64xx input leads

Logic probes from the Tektronix P64xx series share a common 10-lead input connector layout.

These probes include the P6406, P6407, P6408, P6450, P6451, P6452, P6455, P6460, P6462, A6701 and possibly others.

Original input lead sets were

• 012-0386-00 − ten individual leads
• 012-0556-00 − diagnostic leads to connect P6460 to diagnostic test points and test pattern generator outputs of 1240/1241 logic analyzers
• 012-0655-01 − ten individual 40 cm leads
• 012-0655-02 − ten individual 8 cm leads
• 012-0670-00 − ten individual 16 cm leads
• 012-0747-00 − standard 10-wire 10 in/25 cm with pluggable probe tips
• 012-0800-00 − 10-wire 10 cm
• 012-0926-00 − 20 twisted pair leads. Possibly provided with P6455, P6456 and P6457 pattern generator probes.
• 012-0987-00 − ten individual leads P6460
• 012-0989-00 − 10-wire 5 in/12 cm with pluggable probe tips
• 012-0990-00 − 2 pin interface to single grabber
• 012-1000-00 − diagnostic lead set for the P6452 logic probe.
• 012-1053-00 − 16 twisted pair leads plus 2 grabbers for P6452
• 103-0209-00 − 2 x ten bundled leads connecting to a standard GPIB connector, to be used with two probes. Supplied with the DF2

As the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch, it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.

Instructions

• Instructions for 012-0556-00 diagnostics leads

Pictures

• 

  P6408 with 012-0747-00 harness and clips

• 

  Using P64xx probes with jumper wires

• 

  012-0556-00

• 

  012-0747-00 Standard 10 lead set

• 

  012-0926-00

• 

  012-0987-00

• 

  012-0990-00 Grabber with 2 pin interface for 64xx probes.

• 

  012-0990-00