View source for 1200C01

{{Plugin Sidebar
|manufacturer=Tektronix
|series=1240
|type=1200C01
|summary=RS-232 Comm Pack (interface)
|image=Tek 1200C01 1.jpg
|caption=Tektronix 1200C01
|introduced=(?)
|discontinued=(?)
|manuals=
* [[Media:070-6675-02.pdf|Tektronix 1200C01 Installation Instructions]]
* ''070-4343-00 1200C01 COMM Pack Operator’s Manual  needed – please add'' [[Category:Manual needed]]
{{ROM Images}}
* [[Media:160-1915-00.bin |1200C01 U126]]
* [[Media:160-1915-01.bin |1200C01 U126]]
}}
The '''1200C01''' is a [[RS232]] COMM pack for the [[1240]], [[1241]] and [[3001GPX]] logic analyzers. It gives the device the ability to communicate and print through a serial interface. 

Connecting to a PC requires a null modem cable, crossing TX/RX (pins 2/3) and DSR (4) to DTR (6). Communication commands are the same as for the GPIB module [[1200C02]] (see section 2-4 in the [[Media:070-4344-00.pdf|1200C02 Instruction Manual]]).  Capabilities of the device include remote control of the analyzer, save/load setup, capturing data and transfer of captured data over the serial line.

When combined with a disassembler ROM pack, new menu options are available to use the COMM pack to print/transfer disassembled code via serial output.
 
==Internals==
The board layout and schematic can be found in the [[1240]] service manual vol 2, fig 10-28, board A31, schematic 41. 

==Pictures==
<gallery>
Tek 1200C01 1.jpg
Tek 1200C01 2.jpg
Tek 1200C01 3.jpg
Tek 1200C01 4.jpg
Tek 1200C01 5.jpg
Tek 1200C01 6.jpg
Tek 1200C01 7.jpg
Tek 1200C01 8.jpg
</gallery>

[[Category:ROM packs]]