Я4С-91: Difference between revisions
Chrisjones (talk | contribs) No edit summary |
Chrisjones (talk | contribs) No edit summary |
||
Line 13: | Line 13: | ||
}} | }} | ||
The '''Я4С-91''' is a dual timebase plug-in for [[Soviet 7000-series clones]]. It is roughly analogous to the Tek [[ | The '''Я4С-91''' is a dual timebase plug-in for [[Soviet 7000-series clones]]. It is roughly analogous to the Tek [[7B52]]. | ||
It features | It features two [[Russian tunnel diodes|3И306К tunnel diodes]] in the timebase A trigger circuit. | ||
Significant differences to the | Significant differences to the 7B52 include: | ||
* slowest sweep speed 50 ms/div | * slowest sweep speed 50 ms/div | ||
* no ×10 magnifier, direct access to 5 ns/div speed | * no ×10 magnifier, direct access to 5 ns/div speed | ||
Line 23: | Line 23: | ||
* only timebase B has variable time/div | * only timebase B has variable time/div | ||
The external trigger connector is a СР50-73 type. The plugin contains a number of integrated circuits of type 130ЛА3, which is a TTL quad 2-input NAND gate in a surface-mount package, like a 7400. | The external trigger connector is a СР50-73 type. The trigger level control has no separate slope switch. Trigger levels left of centre are on the falling edge, and those right of centre are on the rising edge. This is similar to the way the trigger level control works on the 7B52. The plugin contains a number of integrated circuits of type 130ЛА3, which is a TTL quad 2-input NAND gate in a surface-mount package, like a 7400. | ||
The main interconnect board, which also holds the timing capacitors, is made of a rather weak Paxolin- or FR2-like phenolic paper material rather than fibreglass, and the tracks appear to be silver plated. The example in the photos suffered a crack at one corner which caused a malfunction (triggering only after pressing the single-sweep-reset button, and trace offset to the left). | |||
The example in the photos is labelled in German. A version labelled in Russian also exists. | The example in the photos is labelled in German. A version labelled in Russian also exists. |
Revision as of 04:31, 25 May 2018
The Я4С-91 is a dual timebase plug-in for Soviet 7000-series clones. It is roughly analogous to the Tek 7B52. It features two 3И306К tunnel diodes in the timebase A trigger circuit.
Significant differences to the 7B52 include:
- slowest sweep speed 50 ms/div
- no ×10 magnifier, direct access to 5 ns/div speed
- timebase B always runs after timebase A and has no separate trigger
- delay time is set by a single-turn pot with a reduction drive, and it is not calibrated
- only timebase B has variable time/div
The external trigger connector is a СР50-73 type. The trigger level control has no separate slope switch. Trigger levels left of centre are on the falling edge, and those right of centre are on the rising edge. This is similar to the way the trigger level control works on the 7B52. The plugin contains a number of integrated circuits of type 130ЛА3, which is a TTL quad 2-input NAND gate in a surface-mount package, like a 7400.
The main interconnect board, which also holds the timing capacitors, is made of a rather weak Paxolin- or FR2-like phenolic paper material rather than fibreglass, and the tracks appear to be silver plated. The example in the photos suffered a crack at one corner which caused a malfunction (triggering only after pressing the single-sweep-reset button, and trace offset to the left).
The example in the photos is labelled in German. A version labelled in Russian also exists.
Key Specifications
Time/div | 50 ms to 5 ns |
---|---|
Trigger modes | norm, auto, single sweep |
Trigger sources | internal, external, external/10, line |
Links
Pictures
-
Front
-
Three-quarter view
-
Left side internal
-
Left side detail
-
Timebase A PCB
-
Tunnel diode in Timebase A trigger
-
Right side internal
-
Right side detail
-
Timebase B PCB
-
Output amplifier PCB
-
Closeup of PCB construction
-
Factory-added tape to insulate capacitors from side panel
-
Cam-operated microswitch to select variable time/div
-
Interconnect board (Timebase B and output amplifier removed)