P6440: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 4: Line 4:


==Specifications==
==Specifications==
The probe is composed solely of TTL level integrated circuits. The construction of the probe is made of two board stacked on top of each other.
The pin-out of the probe is given. (looking from the front)
The pin-out of the probe is given. (looking from the front)



Revision as of 13:18, 23 June 2019

The Tektronix P6440 State Probe can be used with the 1205 Logic Analyzers.

It is a 24 channel data acquisition probe with 3 clocks/qualifiers and external trigger. It uses the 174-0752-00, 174-0763-00, and 174-0764-00 lead set.

Specifications

The pin-out of the probe is given. (looking from the front)

Notch Notch Notch
CLK 3 BIT 22 BIT 20 BIT 18 BIT 16 CLK 2 BIT 14 BIT 12 BIT 10 BIT 8 CLK 1 BIT 6 BIT 4 BIT 2 BIT 0
GND BIT 23 BIT 21 BIT 19 BIT 17 EXT TRIG BIT 15 BIT 13 BIT 11 BIT 9 GND BIT 7 BIT 5 BIT 3 BIT 1