155-0064-00: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m (→Fixed typo) |
||
(26 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
[[File:Tek_155-0064-00.jpg |thumb|300px|right|155-0064-00]] | |||
{{Hybrid IC | |||
in a 12-pin TO-8 stud mounted can. | |Manufacturer=Tektronix | ||
|Model=H074A | |||
|Part_nos=155-0064-00 | |||
|Description=vertical output amplifier | |||
|Used_in=7834;7854;7904;7903;7912AD;485;PG502 | |||
|Designers= | |||
}} in a 12-pin TO-8 stud mounted can, developed by Tektronix in the early 1970s. | |||
The hybrid consists of three dice: the M080 differential amplifier, and two | Maximum power dissipation is 4 watts. Rise time is specified as 470 ps (equiv. bandwidth 745 MHz). | ||
D078 NPN output transistors in common-base configuration. | |||
The hybrid consists of three dice: the [[M080]] differential amplifier ("[[ft doubler|f<sub>t</sub> doubler]]"), and two D078 NPN output transistors in common-base configuration. | |||
It is the same as the [[155-0065-00]] (H074) except for the case and pin 3 to case breakdown. | |||
According to [http://hakanh.com/dl/docs/kitinstructions/050-1014-00.pdf Modification 050-1014-00, Vertical Output Microcircuit Replacement], the emitter resistors need to be selected according to a code printed on the device. | |||
* [http://w140.com/155-0064-00.pdf 155-0064-00 Specs (PDF)] | * [http://w140.com/155-0064-00.pdf 155-0064-00 Specs (PDF)] | ||
* [[Media:155-0064-00.pdf]] | |||
<gallery> | <gallery> | ||
155-0064-00 schem.png|Schematic and pinout | |||
155-0064-00-mech.png|Mechanical | |||
</gallery> | </gallery> | ||
==Used in== | |||
* [[7834]], [[7854]] (A18U150) | |||
* [[7904]], [[7903]] (U745, vertical output in SN B260000 and up; B259999 and below use [[155-0065-00]]) | |||
* [[7912AD]] (A34U745) | |||
* [[485]] | |||
* [[PG502]] (U400) | |||
[[Category:Tektronix-made hybrid integrated circuits]] |
Revision as of 08:26, 6 September 2021
The Tektronix H074A (P/N 155-0064-00) is a vertical output amplifier hybrid integrated circuit in a 12-pin TO-8 stud mounted can, developed by Tektronix in the early 1970s.
Maximum power dissipation is 4 watts. Rise time is specified as 470 ps (equiv. bandwidth 745 MHz).
The hybrid consists of three dice: the M080 differential amplifier ("ft doubler"), and two D078 NPN output transistors in common-base configuration.
It is the same as the 155-0065-00 (H074) except for the case and pin 3 to case breakdown.
According to Modification 050-1014-00, Vertical Output Microcircuit Replacement, the emitter resistors need to be selected according to a code printed on the device.
-
Schematic and pinout
-
Mechanical