TekWiki

Microprocessor support table: Difference between revisions

Page Discussion Repairs

Microprocessor support table (view source)

Revision as of 14:45, 3 October 2024

932 bytes added ,  3 October
→‎Tektronix 3001 GPX
 
(19 intermediate revisions by one other user not shown)
Line 210: Line 210:
See [[91TMXX tapes]] for information on tapes.
See [[91TMXX tapes]] for information on tapes.
Note:
Note:
*Introduced 1982
*In catalog 1982-1989
*All acquisition boards are either [[91A24]] or [[91AE24]].  
*All acquisition boards are either [[91A24]] or [[91AE24]].  
*If the [[UPIK 40]] harness is listed it means that it is supported, but not required.
*If the [[UPIK 40]] harness is listed it means that it is supported, but not required.
Line 720: Line 720:
==Tektronix [[1240]]/[[1241]]==
==Tektronix [[1240]]/[[1241]]==


*Introduced 1984
*In catalog 1984-1990
*All acquisition boards are the 18-channel [[1240D2]]. The 9-channel [[1240D1]] cannot be used.  
*All acquisition boards are the 18-channel [[1240D2]]. The 9-channel [[1240D1]] cannot be used.  
*If the [[UPIK 40]] harness is listed it means that it is supported, but not required.
*If the [[UPIK 40]] harness is listed it means that it is supported, but not required.
Line 812: Line 812:
| style="text-align: center;" | N/A
| style="text-align: center;" | N/A
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | 6*1
| style="text-align: center;" | 6X [[P6460]]
| style="text-align: center;" | 12 MHz
| style="text-align: center;" | 12 MHz
|-
|-
Line 846: Line 846:
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 2*1
| style="text-align: center;" | 2X [[P6460]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
Line 854: Line 854:
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 3*1
| style="text-align: center;" | 3X [[P6460]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
Line 886: Line 886:
| style="text-align: center;" | N/A
| style="text-align: center;" | N/A
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 3*1
| style="text-align: center;" | 3X [[P6460]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
Line 894: Line 894:
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | N/A
| style="text-align: center;" | 16 MHz
| style="text-align: center;" | 16 MHz
|-
|-
Line 902: Line 902:
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | N/A
| style="text-align: center;" | 16 MHz
| style="text-align: center;" | 16 MHz
|-
|-
Line 910: Line 910:
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | N/A
| style="text-align: center;" | 16 MHz
| style="text-align: center;" | 16 MHz
|-
|-
Line 918: Line 918:
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | N/A
| style="text-align: center;" | 16 MHz
| style="text-align: center;" | 16 MHz
|-
|-
Line 926: Line 926:
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | N/A
| style="text-align: center;" | 16 MHz
| style="text-align: center;" | 16 MHz
|-
|-
Line 934: Line 934:
| style="text-align: center;" | [[PM205]]
| style="text-align: center;" | [[PM205]]
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | N/A
| style="text-align: center;" | 25.0 MHz
| style="text-align: center;" | 25.0 MHz
|-
|-
Line 942: Line 942:
| style="text-align: center;" | ?
| style="text-align: center;" | ?
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | N/A
| style="text-align: center;" | 25.0 MHz
| style="text-align: center;" | 25.0 MHz
|-
|-
Line 950: Line 950:
| style="text-align: center;" | N/A
| style="text-align: center;" | N/A
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | 6*1
| style="text-align: center;" | 6X [[P6460]]
| style="text-align: center;" | 50 MHz
| style="text-align: center;" | 50 MHz
|-
|-
Line 994: Line 994:
| style="text-align: center;" | N/A
| style="text-align: center;" | N/A
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | 5*1
| style="text-align: center;" | 5X [[P6460]]
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 20 MHz
|-
|-
Line 1,020: Line 1,020:
| style="text-align: center;" | N/A
| style="text-align: center;" | N/A
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | 5*1
| style="text-align: center;" | 5X [[P6460]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
Line 1,046: Line 1,046:
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 3*1
| style="text-align: center;" | 3X [[P6460]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
Line 1,054: Line 1,054:
| style="text-align: center;" | N/A
| style="text-align: center;" | N/A
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | 6*1
| style="text-align: center;" | 6X [[P6460]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
Line 1,280: Line 1,280:


==Tektronix [[1225]]/[[1220]]==
==Tektronix [[1225]]/[[1220]]==
*Introduced 1988
*In catalog 1988
*Note that the configuration table for the [[1230]] is not the same as the one for its two predecessors.
*Note that the configuration table for the [[1230]] is not the same as the one for the [[1240]]/[[1241]].
The internal hardware is different enough that the [[1225]]/[[1220]] can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes.
The internal hardware is different enough that the [[1225]]/[[1220]] can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes.
{| class="wikitable"
{| class="wikitable"
Line 1,347: Line 1,347:


==Tektronix [[1205]]==
==Tektronix [[1205]]==
*Introduced 1988
*In catalog 1988-1989
{| class="wikitable"
{| class="wikitable"
|[[File:Tek 1205 2.jpg|140px|]]
|[[File:Tek 1205 2.jpg|140px|]]
Line 1,382: Line 1,382:


==Tektronix [[1230]]==
==Tektronix [[1230]]==
*In catalog 1989-1993
* The [[1230DPA]] is required for all DPXXXX probes.
* The [[1230DPA]] is required for all DPXXXX probes.
* All acquisition boards are [[1230E1]].
* All acquisition boards are [[1230E1]].
* All of the needed software is included with the personality module.
* All of the needed software is included with the personality module.
Note from operators manual:
<blockquote>
''DISASSEMBLY DISPLAY''
''Microprocessor disassembly is  an option for the analyzer. When you power up with an optional microprocessor probe connected, the analyzer asks if you want to  use the setup for the microprocessor probe. If you want to use the microprocessor probe's setup, press ENTER to load it.  Otherwise, press MENU to preserve the current analyzer setup and access the normal analyzer menus. Disassembly information is discussed in  the operator's manual for each microprocessor disassembly probe. ''
</blockquote>
{| class="wikitable"
{| class="wikitable"
|[[File:Tek 1230.jpg|140px|]]
|[[File:Tek 1230.jpg|140px|]]
Line 1,414: Line 1,423:
| 8086
| 8086
| style="text-align: center;" | DIP
| style="text-align: center;" | DIP
| style="text-align: center;" | [[DP8086D]]
| style="text-align: center;" | [[PM411]],[[DP8086D]]
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | None
Line 1,428: Line 1,437:
| 8088
| 8088
| style="text-align: center;" | DIP
| style="text-align: center;" | DIP
| style="text-align: center;" | [[DP8086D]]
| style="text-align: center;" | [[PM411]],[[DP8086D]]
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | None
Line 1,542: Line 1,551:
| 68000
| 68000
| style="text-align: center;" | DIP
| style="text-align: center;" | DIP
| style="text-align: center;" | [[DP68KD]]
| style="text-align: center;" | [[PM412]],[[DP68KD]]
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | None
Line 1,609: Line 1,618:
| style="text-align: center;" | 19.2 K baud
| style="text-align: center;" | 19.2 K baud
|}
|}
==Tektronix [[Prism 3002]]==
*Introduced 1990
==Tektronix [[3001 GPX]]==
*Introduced 1993
*To run disassembly software, you must use a 3001GPX, 3001MPX, or 3001MPM.
==Tektronix [[TLA 700]]==
*Introduced 1997-1998
Floopy
1,332

edits

Retrieved from "https://w140.com/tekwiki/wiki/Special:MobileDiff/92591...97637"