2715: Difference between revisions

Latest revision as of 10:39, 15 May 2024

Tektronix 2715

1.8 GHz Spectrum Analyzer

Produced from 1995 to (?)

Manuals

(All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 2715 is a CATV spectrum analyzer.

Key Specifications

Frequency	9 kHz to 1.8 GHz: Range may be extended to 2.15 GHz with Opt. 50 or Opt. 75; Preamp limited to 600 MHz
Frequency Span (plus 0 Hz and MAX: 180 MHz/div)	1 kHz/div to 100 MHz/div in 1, 2, 5 sequence
Resolution Bandwidth	300 Hz, 1 kHz, 3 kHz, 10 kHz, 30 kHz, 100 kHz, 300 kHz, 1 MHz and 5 MHz (-6 dB)
RF Input impedance	75 Ω
Maximum Safe Input Power	+70 dBmV (0.1 W or 2.2 V) continuous peak, ≤100 V DC blocking capacitor
RF Attenuator	0 dB to 50 dB, 2 dB steps
Sensitivity (at 300 Hz RBW)	-78 dBmV (-127 dBm); -90 dBmV (-139 dBm) with preamp on
Reference Level	-70 dBm to +20 dBm; -23 dBmV to +66.9 dBmV
Sweep Speed	2 sec/Div to 1 µs/Div in 1, 2, 5 sequence
Triggering Modes	Free Run, Internal, External, Line, TV Line, and TV Field
Displayed Average Noise	−66 dBm to −100 dBm
Display Dynamic Range	80 dB
Dynamic Range	≥100 dBm
Internal Calibrator	100 MHz marker at +18.8 dBmV (-30 dBm)
Memory	124 kB NVRAM can save up to 108 displays of waveforms and markers, and up to 36 front panel setups, large user-defined key programs, and antenna factor tables
Weight	Standard accessories: 11.34 kg (25 lbs); Basic configuration: 10.21 kg (22.5 lbs)
Power	90 − 132 V_AC, 48 to 440 Hz; 90 – 250 V_AC, 48 to 63 Hz. At 115 V_AC, 60 Hz, 90 W (standard), 105 W max (with options)
Features	single and delta markers for readout of frequency and amplitude information Automatic positioning of visual aural carriers, Visual and aural carrier levels and frequencies for selected channels, Survey of system visual and aural carrier levels and frequencies, Depth of modulation, Aural carrier deviation measurement, Visual carrier-to-noise measurement, and Visual to carrier amplitude and frequency difference measurements. Digital Storage Display (positive peak only, positive/negative peak, max hold, waterfall, or analog sweep), Ensemble Averaging, Internal Preamp, Internal Calibrator (accessed through Input Menu), Alternate Reference Level Units (dBm, dBmV, dBV, dBµV, dBµW, and dBµV/m), User-Definable Power-on Status, Center Measure, Graticule Illumination (for CRT photography), and Direct Plot/Print (Printers via Opt. 03 GPIB, or RS-232-C interface via Opt. 08).

Options

Opt. 03: GPIB Interface (cannot be combined with Opt. 08)
Opt. 05: 100 kHz to 1.8 GHz External Tracking Generator (includes option 15)
Opt. 07: Add 2704 Inverter/2705 Battery Pack
Opt. 08: RS-232 Port (cannot be combined with Opt. 03)
Opt. 15: Tek 1405 TV Sideband Adapter interface installed at J101 as SMA female
Opt. 30: Rackmount
Opt. 33: Travel Line Package (includes Rain cover, Accessory pouch, Gray filter and Carrying strap)
Opt. 34: Portable to Rackmount Adapter
Opt. 50: Frequency extension to 2.15 GHz, 50 Ω N connector input
Opt. 75: Frequency extension to 2.15 GHz, 75 Ω BNC connector input, with quick change to 75 Ω F connector

Connectors

Front panel: RF INPUT, BNC connector (75 Ω, +20 dBm max, 100 V DC blocking capacitor); OPTION (Unknown connector – service manual only indicates that the front panel position is for a Future Option. No internal tracking generator was available like with the 2710, 2711, and 2712).

Rear panel: J101 Female SMA installed for Opt. 15; J102 EXT TRIG, BNC connector (10 kΩ, 50 V (DC + peak AC)); J103 female DB15 connector Accessory (Pin 1 EXTVIDEO, Pin 2 SWPGATE, Pin 3 Ground, Pin 4 SWP, Pin 5 LOGVID, Pin 6 CLK0, Pin 7 DATAI, Pin 8 DATAO, Pin 9 EXTGLATCH, Pin 10 26.38 MHz, Pin 11 VLVL, Pin 12 SWPSLOPE, Pin 13, 14, 15 Unused); J104 Opt. 03: GPIB connector (IEEE Std 488 connector) or Opt. 08: DB9 connector, Digital Communication Port - RS-232 interface

Links

Documents Referencing 2715

Document	Class	Title	Authors	Year	Links
2EW-10598-0.pdf	Application Note	Cable TV Measurements Using the 2714/2715 Spectrum Analyzers		1995	2714 • 2715

Pictures

@@ Line 1: / Line 1: @@
-{{Oscilloscope Sidebar |
+{{Instrument Sidebar
-title=Tektronix 2715 |
+|class=Spectrum Analyzer
-summary=Spectrum Analyzer 9 kHz to 1.8 GHz |
+|manufacturer=Tektronix
-image= Tek_2715_Waveform_image.jpg |
+|model=2715
-caption=Tektronix 2715 |
+|summary=1.8 GHz Spectrum Analyzer
-introduced=1995 |
+|image= Tek_2715_Waveform_image.jpg
-discontinued=(?) |
+|caption=Tektronix 2715
-manuals=
+|introduced=1995
-Need 2715 User Manual
+|discontinued=(?)
-* [[Media:070-8532-00.pdf | Tektronix 2715 Service Manual (PDF)]]
+|manuals=
-* [[Media:070-8533-04.pdf | Tektronix 2714 & 2715 Programmer Manual (PDF)]]
+* ''[[Media:070-9115-05.pdf|2715 User Manual 070-9115-05 needed]]'' [[Category:Manual needed]]
-* [[Media:2EW-10598-0.pdf| Cable TV Measurements using the 2714/1715 Spectrum Analyzers]]
+* [[Media:070-8535-06.pdf|Tektronix 2714/2715 Reference]]
+* [[Media:070-9096-06.pdf|Tektronix 2715 Service Manual Vol. 1 070-9096-06]]
+* [[Media:070-8532-00.pdf|Tektronix 2715 Service Manual 070-8532-00]]
+* [[Media:070-8533-05.pdf|Tektronix 2714/2715 Programmer Manual -05]]
+* [[Media:070-8533-04.pdf|Tektronix 2714/2715 Programmer Manual -04]]
+* [[Media:2EW-10598-0.pdf|Cable TV Measurements using the 2714/1715 Spectrum Analyzers]]
 }}
+The '''Tektronix 2715''' is a CATV spectrum analyzer.
-The '''Tektronix 2715''' is a CATV spectrum analyzer which can perform In-Service Analog Carrier Measurements without disruption of service to subscribers.  The 2715 provides accurate and automated measurement of carrier-to-noise, in-channel response, and coherent distortion signals as well as carrier levels, frequencies, and more … without removal of video carriers or modulation.
-The 2715 has a frequency range of 9 kHz to 1.8 GHz which can be extended to 2.15 GHz with Opt. 50 or Opt. 75..  The minimum resolution bandwidth is 300 Hz, and provides measurement resolution proportional to the frequency accuracy or span.   With non-volatile memory (NVRAM) at 124 kB can save up to 108 displays of waveforms and markers, and up to 36 front panel setups, large user-defined key programs, and antenna factor tables.
-The single and delta markers provide direct readout of frequency and amplitude information of any point along any displayed trace.  Or, get the relative (delta) frequency and amplitude information between any two points along any displayed trace or between traces.
-The 2715 Cable TV Spectrum Analyzer has features to support the measurements necessary to maintain a functional CATV system like: Automatic positioning of visual aural carriers, Visual and aural carrier levels and frequencies for selected channels, Survey of system visual and aural carrier levels and frequencies, Depth of modulation, Aural carrier deviation measurement, Visual carrier-to-noise measurement, and Visual to carrier amplitude and frequency difference measurements.
-Additional features include Digital Storage Display (selectable acquisition modes of positive peak only, positive/negative peak, Max hold, Waterfall, and an analog sweep when digital storage is off), Ensemble Averaging, Internal Preamp, Internal Calibrator (accessed through Input Menu), Alternate Reference Level Units (dBm, dBmV, dBV, dBµV, dBµW, and dBµV/m), User-Definable Power-on Status, Center Measure, Graticule Illumination (for CRT photography), and Direct Plot/Print (Printers via Opt. 03 GPIB, or RS-232-C interface via Opt. 08).
-Front panel inputs/outputs are: RF INPUT [[BNC connector]] (75Ω, +20 dBm Max, 100 V DC blocking capacitor); and OPTION [[Unknown connector]] (Service manual only indicates that the front panel position is for a '''Future Option'''.  No internal tracking generators were available like with the other 2710, 2711, and 2712).
-Rear panel inputs/outputs are: J101 [[SMA connector]] (Female SMA installed for Opt. 15), J102 EXT TRIG [[BNC connector]] (10 kΩ, 50V (DC + peak AC)), J103 [[DB9 connector]] Female (Not RS-232 compatible.  Accessory connector: Pin 1 Video Input, Pin 2 Ground, Pin 3 Video Output, Pin 6 Sweep Gate, Pin 7 Sweep Output, all others unused), J104 Opt. 03: [[GPIB connector]] (IEEE Std 488 connector) or Opt. 08: [[RS-232 interface]] (Digital Communication Port.).
 {{BeginSpecs}}
-{{Spec | Frequency Range | 9 kHz to 1.8 GHz: Range may be extended to 2.15 GHz with Opt. 50 or Opt. 75; Preamp limited to 600 MHz }}
+{{Spec | Frequency | 9 kHz to 1.8 GHz: Range may be extended to 2.15 GHz with Opt. 50 or Opt. 75; Preamp limited to 600 MHz }}
-{{Spec | Frequency Span Range (plus 0 Hz and MAX: 180 MHz/div) | 1 kHz/div to 100 MHz/div in 1, 2, 5 sequence }}
+{{Spec | Frequency Span (plus 0 Hz and MAX: 180 MHz/div) | 1 kHz/div to 100 MHz/div in 1, 2, 5 sequence }}
-{{Spec | Resolution Bandwidth Range | -6 dB bandwidth selections are 300 Hz, 1 kHz, 3 kHz, 10 kHz, 30 kHz, 100 kHz, 300 kHz, 1 MHz and 5 MHz }}
+{{Spec | Resolution Bandwidth |300 Hz, 1 kHz, 3 kHz, 10 kHz, 30 kHz, 100 kHz, 300 kHz, 1 MHz and 5 MHz (-6 dB)}}
-{{Spec | RF Input impedance | 75Ω }}
+{{Spec | RF Input impedance | 75 Ω }}
 {{Spec | Maximum Safe Input Power | +70 dBmV (0.1 W or 2.2 V) continuous peak, ≤100 V DC blocking capacitor }}
-{{Spec | RF Attenuator Range | 0 dB to 50 dB, 2 dB steps }}
+{{Spec | RF Attenuator | 0 dB to 50 dB, 2 dB steps }}
 {{Spec | Sensitivity (at 300 Hz RBW) | -78 dBmV (-127 dBm); -90 dBmV (-139 dBm) with preamp on }}
-{{Spec | Reference Level Range | -70 dBm to +20 dBm; -23 dBmV to +66.9 dBmV }}
+{{Spec | Reference Level | -70 dBm to +20 dBm; -23 dBmV to +66.9 dBmV }}
-{{Spec | Sweep Speed Range | 2 sec/Div to 1 µs/Div in 1, 2, 5 sequence }}
+{{Spec | Sweep Speed | 2 sec/Div to 1 µs/Div in 1, 2, 5 sequence }}
 {{Spec | Triggering Modes | Free Run, Internal, External, Line, TV Line, and TV Field }}
 {{Spec | Displayed Average Noise | −66 dBm to −100 dBm }}
@@ Line 42: / Line 34: @@
 {{Spec | Dynamic Range | ≥100 dBm }}
 {{Spec | Internal Calibrator | 100 MHz marker at +18.8 dBmV (-30 dBm) }}
-{{Spec | Included Accessories | PC Software; Power Cord; User Manual; Programmer Manual; Software Reference Manual; Front Cover; 75Ω BNC Connector, 75Ω F Connector; Choice of GPIB or RS-232 (Opt. 03 or Opt. 08)}}
+{{Spec | Memory | 124 kB NVRAM can save up to 108 displays of waveforms and markers, and up to 36 front panel setups, large user-defined key programs, and antenna factor tables }}
 {{Spec | Weight | Standard accessories: 11.34 kg (25 lbs); Basic configuration: 10.21 kg (22.5 lbs) }}
 {{Spec | Power | 90 − 132 V<sub>AC</sub>, 48 to 440 Hz; 90 – 250 V<sub>AC</sub>, 48 to 63 Hz.  At 115 V<sub>AC</sub>, 60 Hz, 90 W (standard), 105 W max (with options) }}
-{{Spec | Operating Atmospherics | Temperatures: 0 °C to +50 °C;  Humidity: MIL-T-28800E; Altitude: Up to 4.6 km (15,000 ft) }}
+{{Spec | Features|
+* single and delta markers for readout of frequency and amplitude information
+* Automatic positioning of visual aural carriers, Visual and aural carrier levels and frequencies for selected channels, Survey of system visual and aural carrier levels and frequencies, Depth of modulation, Aural carrier deviation measurement, Visual carrier-to-noise measurement, and Visual to carrier amplitude and frequency difference measurements.
+* Digital Storage Display (positive peak only, positive/negative peak, max hold, waterfall, or analog sweep), Ensemble Averaging, Internal Preamp, Internal Calibrator (accessed through Input Menu), Alternate Reference Level Units (dBm, dBmV, dBV, dBµV, dBµW, and dBµV/m), User-Definable Power-on Status, Center Measure, Graticule Illumination (for CRT photography), and Direct Plot/Print (Printers via Opt. 03 GPIB, or RS-232-C interface via Opt. 08).
+}}
 {{EndSpecs}}
-==Options==
+===Options===
+<small>
 * Opt. 03: GPIB Interface (cannot be combined with Opt. 08)
 * Opt. 05: 100 kHz to 1.8 GHz External Tracking Generator (includes option 15)
@@ Line 56: / Line 53: @@
 * Opt. 30: Rackmount
 * Opt. 33: Travel Line Package (includes Rain cover, Accessory pouch, Gray filter and Carrying strap)
-* Opt. 34: Portable to Rackmount Adapter.
+* Opt. 34: Portable to Rackmount Adapter
-* Opt. 50: Frequency extension to 2.15 GHz, 50Ω input impedance with Type N connector
+* Opt. 50: Frequency extension to 2.15 GHz, 50 Ω [[N connector]] input
-* Opt. 75: Frequency extension to 2.15 GHz, 75Ω input impedance with BNC with quick change to 75Ω  Type F connector
+* Opt. 75: Frequency extension to 2.15 GHz, 75 Ω [[BNC connector]] input, with quick change to 75 Ω [[F connector]]
+</small>
+===Connectors===
+'''Front panel:''' RF INPUT, [[BNC connector]] (75 Ω, +20 dBm max, 100 V DC blocking capacitor); OPTION (Unknown connector – service manual only indicates that the front panel position is for a '''Future Option'''.  No internal tracking generator was available like with the 2710, 2711, and 2712).
+'''Rear panel:''' J101 [[SMA connector|Female SMA]] installed for Opt. 15; J102 EXT TRIG, [[BNC connector]] (10 kΩ, 50 V (DC + peak AC)); J103 [[D-sub connector|female DB15 connector]] Accessory (Pin 1 EXTVIDEO, Pin 2 SWPGATE, Pin 3 Ground, Pin 4 SWP, Pin 5 LOGVID, Pin 6 CLK0, Pin 7 DATAI, Pin 8 DATAO, Pin 9 EXTGLATCH, Pin 10 26.38 MHz, Pin 11 VLVL, Pin 12 SWPSLOPE, Pin 13, 14, 15 Unused); J104 Opt. 03: [[GPIB connector]] (IEEE Std 488 connector) or Opt. 08: [[D-sub connector|DB9 connector]], Digital Communication Port - [[RS-232 interface]]
+==Links==
+{{Documents|Link=2715}}
+==See Also==
+* [[CSS500]] Cable Television System Software for controlling VM700A, TDC-10, 1450A, 2714, 2715, TV1350, Rohde & Schwarz EMFP
 ==Pictures==