292: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(4 intermediate revisions by the same user not shown)
Line 17: Line 17:
The '''Tektronix Type 292''' is a Semiconductor Tester Power Supply, to be used with a test fixture.
The '''Tektronix Type 292''' is a Semiconductor Tester Power Supply, to be used with a test fixture.


The [[016-0057-00]] is the standard fixture for use with the 292.
The [[016-0057-00]] is the standard transistor fixture for use with the 292 (grounded emitter circuit).


A [[016-0058-00]] board, intended for grounded base circuit, is listed but not pictured in the 292 manual, and is never mentioned in any TEK catalog.
A 016-0058-00 board, intended for grounded base circuit, is listed but not pictured in the 292 manual, and is never mentioned in any Tektronix catalog.


A [[016-0059-00]] PCB for testing diodes is shown in the 292 manual. This diode test jig adapter was using a 013-0080-00 diode test jig.
A [[016-0059-00]] adapter for testing diodes is shown in the 292 manual. This test adapter is using a 013-0080-00 diode test jig (see [[016-0059-00]] for a picture).
This diode test jig for the 292 is an alternative for the poorly working (bad contact) original [[TF-1]] (017-0721) for the [[291]], together with a new adapter ([[017-0075-00]]).
This diode test fixture for the 292 is an alternative for the poorly working (bad contact) original [[TF-1]] (017-0721) for the [[291]]. Together with a new adapter ([[017-0075-00]]), the 013-0080-00 diode test jig is an improvement for the [[291]].


==Pictures==
==Pictures==

Latest revision as of 11:52, 4 November 2023

Tektronix 292
Semiconductor Tester Power Supply
Tektronix Type 292

Produced from 1964 to (?)

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix Type 292 is a Semiconductor Tester Power Supply, to be used with a test fixture.

The 016-0057-00 is the standard transistor fixture for use with the 292 (grounded emitter circuit).

A 016-0058-00 board, intended for grounded base circuit, is listed but not pictured in the 292 manual, and is never mentioned in any Tektronix catalog.

A 016-0059-00 adapter for testing diodes is shown in the 292 manual. This test adapter is using a 013-0080-00 diode test jig (see 016-0059-00 for a picture). This diode test fixture for the 292 is an alternative for the poorly working (bad contact) original TF-1 (017-0721) for the 291. Together with a new adapter (017-0075-00), the 013-0080-00 diode test jig is an improvement for the 291.

Pictures