The Tektronix Type 292 is a Semiconductor Tester Power Supply, to be used with a test fixture.
The 016-0057-00 is the standard fixture for use with the 292.
A 016-0058-00 board, intended for grounded base circuit, is listed but not pictured in the 292 manual, and is never mentioned in any TEK catalog.
A 016-0059-00 PCB for testing diodes is shown in the 292 manual. This diode test jig adapter was using a 013-0080-00 diode test jig. This test jig replaced the poorly working (bad contact) original TF-1 (017-0721) for the 291, together with a new adapter (017-0075-00).
- Tektronix 292 Manual (PDF)
- Tektronix 292 Manual (BAMA, PDF)
- Tektronix 292 Factory Calibration Procedure, April 1967