067-0587-01: Difference between revisions
(internals) |
m (link) |
||
| Line 3: | Line 3: | ||
It provides a uniform step calibrated deflection factor, a fast risetime | It provides a uniform step calibrated deflection factor, a fast risetime | ||
step response function and a common-mode input test for both the | step response function and a common-mode input test for both the | ||
vertical and trigger systems. | vertical and trigger systems. It is the predecessor of the [[067-0587-02]]. | ||
It uses one custom Tektronix IC, the [[155-0078-00]]. The manual says it | It uses one custom Tektronix IC, the [[155-0078-00]]. The manual says it | ||
Revision as of 19:29, 16 October 2014
The 067-0587-01 Calibration Fixture is designed to standardize the horizontal and vertical deflection factors of 7000 series mainframes. It provides a uniform step calibrated deflection factor, a fast risetime step response function and a common-mode input test for both the vertical and trigger systems. It is the predecessor of the 067-0587-02.
It uses one custom Tektronix IC, the 155-0078-00. The manual says it is a high frequency push-pull amplifier.
It uses one tunnel diode, the 152-0177-00, a 10 mA, 4 pF diode in a DO-17 package. It also uses 12 Tektronix custom Schottky diodes, part 152-0442-00 (speced as matched pairs) in the tunnel diode pulse shaper and in the CW peak-to-peak detector. The service manual calls them "diconnect diodes", physically they look like snap-off diodes found in other Tektronix fast risetime pulsers. Note that there is a typo in the service manual for CR80, CR84, and CR85 in the peak-to-peak detector.
Specifications
Key Specifications
| Risetime | 300 ps |
|---|---|
| Bandwidth | 500 MHz |
