7250: Difference between revisions
No edit summary |
No edit summary |
||
| Line 15: | Line 15: | ||
<gallery> | <gallery> | ||
Image:7250_front.jpg|Front. | |||
Image:7250_front_inside.jpg|Front inside. | |||
Image:7250_rear_panel.jpg|Rear. | |||
Image:7250_rear_inside.jpg|Rear inside. | |||
Image:7250 memory.JPG|Memory board. | Image:7250 memory.JPG|Memory board. | ||
</gallery> | </gallery> | ||
Revision as of 13:38, 14 November 2010
The Tektronix 7250 is an digitizing oscilloscope with a 6GHz bandwidth. It uses a scan converter CRT for digitizing. From the scan converter, the trace is transferred to memory boards conventional RAM. The vertical resolution is 11 bits. The digitizer captures 512 samples in one shot. The fastest sweep is 50ps/division, approximately 1 terasample per second. The sensitivity is 500mV/division. Due to the absence of vertical amplifiers in the signal path, the 7250 can handle 2kV spikes without damage. The input is through a 50-ohm N connector on the rear panel, which loops through, rather than being terminated internally. At 132 pounds, it is the heaviest one-piece oscilloscope ever sold by Tektronix.
http://w140.com/tektronix_7250.pdf
-
Front.
-
Front inside.
-
Rear.
-
Rear inside.
-
Memory board.
