4S2: Difference between revisions
No edit summary |
No edit summary |
||
Line 33: | Line 33: | ||
==Pictures== | ==Pictures== | ||
<gallery> | <gallery> | ||
4s2 3.jpg | 4s2 3.jpg|4S2 | ||
4s2 2.jpg | 4s2 2.jpg|4S2 | ||
4s2 1.jpg | 4s2 1.jpg|4S2 | ||
4s2 4.jpg | 4s2 4.jpg|4S2 | ||
Tek 4s2a front.jpg|4S2A | |||
Tek 4s2a sampler.png|42SA sampler schematic | Tek 4s2a sampler.png|42SA sampler schematic | ||
Tek 4s2a pulse gen.png|42SA pulse generator schematic | Tek 4s2a pulse gen.png|42SA pulse generator schematic |
Revision as of 13:38, 3 September 2018
Template:Plugin Sidebar 2 The Tektronix 4S2 is a two-channel sampling vertical plug-in for the 661. Signals enter the 4S2 through GR-874 connectors on the front panel. Unlike the 4S1, the 4S2's signal path does not contain a delay line between the input connector and the sampler. This has the advantage of maintaining higher pulse fidelity and thus higher bandwidth, but the disadvantage of making it impossible to see the leading edge of the triggering event unless a pre-trigger is used.
The 4S2, which was designed in 1963, uses a four-diode sampling bridge. The 4S2A, designed in 1965, uses a two-diode sampling bridge. This design change is discussed in the 4S2A Engineering Spec document linked below. The 4S2 does not provide trigger pick-off. The 4S2A provides trigger pick-off.
Key Specifications
Bandwidth | DC to 3.9 GHz |
---|---|
Rise time | 90 ps |
Deflection | 2 mV/Div to 200 mV/Div, 1−2−5 |
Pictures
-
4S2
-
4S2
-
4S2
-
4S2
-
4S2A
-
42SA sampler schematic
-
42SA pulse generator schematic
-
4S2 Pulse Generator
-
4S2 Pulse Generator
-
4S2 Pulse Generator
-
4S2 Pulse Generator
-
4S2 Sampler
-
4S2 Sampler
-
AC Amplifier
-
AC Amplifier
-
Memory
-
Memory
-
Inverter
-
Inverter
-
Dual Trace
-
Dual Trace
-
4S2
-
4S2
-
4S2
-
4S2
-
4S2
-
4S2
-
4S2
-
4S2 Samplers
-
4S2 Top
-
4S2 Top Front
-
4S2 Top
-
Pulse Generator Card Removed, Var Gain Pots
-
4S2 Rear
-
4S2A Pulse Generator Front
-
4S2A Pulse Generator Rear
-
4S2A Gate (Sampler) Board