1A5: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 29: | Line 29: | ||
V<sub>C</sub> is controlled by a ten-turn potentiometer and can vary from −5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges). | V<sub>C</sub> is controlled by a ten-turn potentiometer and can vary from −5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges). | ||
[[Category:Specifications needed]]''please add'' | <!-- [[Category:Specifications needed]]''please add'' --> | ||
==Pictures== | ==Pictures== | ||
Revision as of 13:00, 4 October 2018
Template:Plugin Sidebar 2 The Tektronix Type 1A5 is a differential amplifier plug-in for 500-series scopes.
It has an Amphenol 165 series connector on the front panel for direct connection of the Type P6046 Active Differential Probe.
Type 1A5 was introduced in 1967, replacing Types W and Z, and lasted until the end of the 500-series scope line.
Key Specifications
| Bandwidth | 50 MHz down to 5 mV/div, 40 MHz at 1 mV/div |
|---|---|
| Deflection | 1 mV/div to 20 V/div, 1−2−5 |
| Common-mode rejection | 20,000:1 at low frequencies, deteriorating to 200:1 at 20 MHz |
Like most Tektronix differential plug-ins, the 1A5 has three modes: VA−VC, VA−VB, and VC−VB.
VC is controlled by a ten-turn potentiometer and can vary from −5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges).
