E: Difference between revisions
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
series=[[500-series scopes]] | | series=[[500-series scopes]] | | ||
manuals= | manuals= | ||
* [http://bama.edebris.com/manuals/tek/e Manual] | <!-- * [http://bama.edebris.com/manuals/tek/e Manual] --> | ||
* [http://w140.com/tek_fcp/tek_type_e_factory_cal_proc.pdf Factory cal procedure] | * [http://w140.com/tek_fcp/tek_type_e_factory_cal_proc.pdf Factory cal procedure] | ||
* [[Media:070-023.pdf|Tektronix Type E Manual (PDF, OCR)]] | |||
* [[Media:070-023.pdf|Manual (PDF, OCR)]] | |||
* [[Media:tek_type_e_fcp.pdf|Factory cal procedure (PDF, OCR, bad-OCR)]] | * [[Media:tek_type_e_fcp.pdf|Factory cal procedure (PDF, OCR, bad-OCR)]] | ||
}} | }} | ||
Revision as of 16:06, 14 October 2018
Template:Plugin Sidebar 2 The Tektronix Type E is a low-level differential amplifier plug-in for 500-series scopes. The sensitivity ranges from 50 μV/div to 10 mV/div. The input is an XLR connector feeding directly into the grids of a 12AX7 differential amplifier.
Despite the DC-coupled input stage, the Type E is an AC-coupled amplifier. It has front panel knobs for selecting the low-frequency and high-frequency cutoff. It achieves a 50,000 to 1 common mode rejection ratio. Maximum bandwidth is 60 kHz. It has seven tubes on a shock-mounted subchassis.
The Type 53E/54E was introduced in 1955. Along with Types G and K, it was the first plug-in offered after, not during, the original 531/535 introduction in 1954. The nomenclature was revised after just a few months, to 53/54E. In 1959, when the A-suffix mainframes came out, all plugins dropped the "53/54". Type E was dropped after 1968; its replacement, Type 1A7, had been available for a few years.
Links
- Tektronix Type E @ radiomuseum.org
- Tektronix Type E / 53/54E @barrytech.com]
Pictures
-
-
-
-
-
-
-
-
-
-
schematic
