8056: Difference between revisions
No edit summary |
(157- part# details.) |
||
Line 19: | Line 19: | ||
Tek part number: 154-0417-00 | Tek part number: 154-0417-00 | ||
{| class="wikitable" | |||
{{Checkedtubes TableHeader}} | |||
|- | |||
| [[502]], [[10A1]], [[3A7]] || 157-0099-00 || All | |||
|} | |||
{{Tube aging reference}} | |||
==Links== | ==Links== | ||
* [http://w140.com/8056.pdf RCA 8056 Datasheet (PDF)] | * [http://w140.com/8056.pdf RCA 8056 Datasheet (PDF)] |
Revision as of 21:54, 19 June 2020
![](http://w140.com/tekwiki/images/thumb/a/a8/Nuvistor_8056.jpg/350px-Nuvistor_8056.jpg)
The 8056 is a low-voltage Nuvistor triode with a 6.3 V heater.
It is used in the 10A1, 422, 3A7, W and the 5T3. It can sometimes be replaced with a MPF102 FET.
The 8056 has a maximum plate-to-cathode voltage of 50 V. Contrast this with another Nuvistor triode, the 7586, which has a maximum plate-to-cathode voltage of 110 V.
The 7586 and 8056 have the same pinout, but the two tubes are not interchangable since they have different voltage ratings.
For example, in the front-end cathode followers of the 3A1, the plate voltage of the 7586 tubes, V113 and V123, is 55 V, and possibly a bit higher during warm-up. This exceeds the maximum plate voltage of the 8056, unless the 3A1 is modified for lower front-end plate voltages.
Tek part number: 154-0417-00
Aged/Checked/Matched Pair Details | ||
---|---|---|
Used in | Tek Part# | S/N Range |
502, 10A1, 3A7 | 157-0099-00 | All |
Reference: