DAS9100: Difference between revisions
No edit summary |
No edit summary |
||
| Line 22: | Line 22: | ||
[[91P16]] and [[91P32]]. | [[91P16]] and [[91P32]]. | ||
The analyzers had an optional [[DC100]] tape drive to store | |||
The analyzers had an optional [[DC100]] tape drive. It was used to store Pattern generator menus, mnemonics menu and table, reference memory, and data acquisitions. | |||
There was a also an IBM software package available ([[91DVS]]). | There was a also an IBM software package available ([[91DVS]]). | ||
*GPIB | |||
The DAS9100 can operate via the [[GPIB]] port as either a talker or a listener. It is compatible with controllers such as the Tektronix [[4041]], [[4051]], [[4052]] and [[4054]]. | |||
*RS-232C | |||
The [[RS232]] interface has two modes of operation. The first mode is almost the same as the [[GPIB]] mode. The controller commands the analyzer to perform functions using the same commands as for [[GPIB]]. The hardware interface works with standard modems. The second mode is a Master-Slave operation. Using another 9100 you can remotely control another 9100. | |||
*Composite output | |||
The video out jack is part of option 02. | |||
{{MissingSpecs}} | {{MissingSpecs}} | ||
==Links== | ==Links== | ||
* [http://www.barrytech.com/tektronix/logic_analyzers/tekdas9100.html DAS9100 @ barrytech.com] | * [http://www.barrytech.com/tektronix/logic_analyzers/tekdas9100.html DAS9100 @ barrytech.com] | ||
Revision as of 06:56, 11 February 2019
The Tektronix Digital Analysis 9100 is a Logic Analyzer system. It can have up to 104 acquisitions channels.
The following cards where available for it: 91A04A, 91AE04A 91A08, 91A32, 91A24, 91AE24 91S16, 91S32, 91P16 and 91P32.
The analyzers had an optional DC100 tape drive. It was used to store Pattern generator menus, mnemonics menu and table, reference memory, and data acquisitions.
There was a also an IBM software package available (91DVS).
- GPIB
The DAS9100 can operate via the GPIB port as either a talker or a listener. It is compatible with controllers such as the Tektronix 4041, 4051, 4052 and 4054.
- RS-232C
The RS232 interface has two modes of operation. The first mode is almost the same as the GPIB mode. The controller commands the analyzer to perform functions using the same commands as for GPIB. The hardware interface works with standard modems. The second mode is a Master-Slave operation. Using another 9100 you can remotely control another 9100.
- Composite output
The video out jack is part of option 02.
Key Specifications
- please add
