Pacific Measurements 1038

Manuals – Specifications – Links – Pictures

The Pacific Measurements 1038 was a 1 or 2 channel scalar network analyzer incorporating a Tektronix D10 (P-7 long persistance phosphor), D11 storage (Split Screen Storage) or [D14] 5000-series scopes display unit mainframe with optional rack mount and IEEE bus.

Options were available for:
• Horizontal Plug-Ins H10 (Sweep drive), H11 (Sweep Drive and memory address circuits), H12 (Sweep drive and ratio channel), H13 (Sweep drive, memory address circuits and ratio channel) and K11 (Replaces H11 and provides amplitude sweep).
• Vertical Plug-Ins V10 (Log amp and signal conditioning), V11 (Log amp, signal conditioning and 256 point memory), V12 (Log amp, signal conditioning and 1024 point memory) and V20 (Linear amp, 1024 point memory and for use in conjunction with Model 1018B power meter).
• N10 Plug-In (2 Channel Network Analyzer).
• NS20 Plug-In (2 Channel Network Analyzer) with optional NS201 (2 to 18.5 GHz RF Source Module).
• C10 Plug-In Calibration Fixture and Extender Kit for direct calibration and check out of the D14/D14A Mainframe. It has extension cables to permit calibration and maintenance of the H/V system plug-ins.
• Power Input Calibrator Unit (Detector Simulator - P/N 15484) will act as a "Standard" detector to furnish accurate voltages to the H/V system when it is desired to calibrate the amplitde correction circuitry.

Pacific Measurements later became part of Wavetek.

Key Specifications

H/V System
--------------------
Offset Control Resolution	3 Digits
Offset Control Range	±99.9dB
Offset Control Accuracy	±0.02dB/10dB ±0.05dB
Drift @ 0dBm	<0.01dB/°C (+15° to +45°C )
Drift @ -40dBm	<0.5dB/24 Hrs at constant temperature )
Frequency Range	100kHz to 18.5GHz
Frequency Range with Single Diode (P/N:15272)
or Balanced (P/N:15285) Detector	1MHz to 26.5GHz
Frequency Range with Wavetek Pacific
MeasurementsWaveguide Detector (P/N:15882)	26.5GHz to 40.0GHz
Frequency Range from other
Waveguide Manufacturers	up to 110GHz
Absolute (dBm) or Relative (dB) Power	-50dBm to +10dBm
Dynamic Range	60dB
Dynamic Range Reference Channel	40dB
Insertion Loss/Gain and Return Loss	0.02dB resolution
Noise Floor	-70dB
Power	Approx. 100VA @ 50 - 440Hz; 100, 120, 240VAC ±10%
Dimensions - Bench Mount (H x W x D)	381 x 216 x 483 mm ( 15 x 8.5 x 19 in.)
Dimensions - Rack Mount (H x W x D)	178 x 483 x 483 mm ( 7 x 19 x 19 in.)
Dimensions - H/V Plug-Ins (H x W x D)	16.8 x 6.60 x 29.7 cm ( 6.6 x 2.6 x 11.7 in.)
Weight	18.2kg (40lbs)
Weight Vertical Plug-In	2.32kg (5lbs)
Weight Horizontal Plug-In	2.0kg (4.4lbs)
--------
Power Detectors	P/N's 15272, 13782 and 13783 unless noted
------------------------
Input Impedance	50 ohms, nominal
Maximum Input Power	+23 dBm (200mV) peak or average
Return Loss	>25.0dB, SWR <1.12 from 1MHz to 1GHz
Return Loss	>18.0dB, SWR <1.29 from 2 to 12.4GHz
Return Loss	>14.0dB, SWR <1.50 up to 26.5GHz
Accuracy	3% to 18.5GHz and 5% to 26.5GHz
Flatness P/N:15272	±0.5dB to 18.5GHz
Flatness P/N:15272	±1.0dB 18.5 to 26.5GHz
Flatness P/N:13782	±1.0dB to 18.5GHz
Flatness P/N:13783	±1.0dB to 18.5GHz
Flatness	±2.0dB with type N or APC7 connectors to 18GHz
Flatness	±2.0dB to 26.5GHz with APC3.5 connectors
Maximum Input Power P/N:15882	+20 dBm (100mV) peak or average
Return Loss P/N:15882	>10dB, SWR <1.92 from 26.5 to 40.0GHz
Accuracy P/N:15882	5% from 26.5 to 40.0GHz
Flatness P/N:15882	±2.0dB from 26.5 to 40.0GHz
Operating Temperature	0° to 50°C
Non-operating Temperature	-50° to +65°C
Measurement Accuracy	0.2dB to 2dB from 30MHz to 26.5GHz
Measurement Accuracy	0.5dB to 2dB from 26.5GHz to 40.0GHz
Cable Length	1.5m (5ft)
Weight	Approx. 230gm (8oz)

Manuals

Please add

Prices

Please add

Links

• Sphere Research[1]
• "MAR104 - Mobile Amateur Rain Radar" Project with Return Loss Measurement Example[2]

Pictures

• 
• 
• 
• 
• 
• 
• 
• 
•