1230: Difference between revisions
No edit summary |
No edit summary |
||
| Line 41: | Line 41: | ||
==Internals== | ==Internals== | ||
The keypad switches have a tendency to become very "bouncy". See the | The keypad switches have a tendency to become very "bouncy". See the "repair" tab. | ||
Revision as of 06:44, 13 May 2019
The Tektronix 1230 is a logic analyzer chassis that supports 16 to 64 channels, 100 MHz asynchronous, 25 MHz synchronous. It was introduced in 1989, a year after the 1225 and 1220.
The number of acquisition channels depends on the number of acquisition cards installed. There is 16 channels per card and 2 to 4 cards could be installed. The 1230 is very similar to the Tektronix 1225 and 1220, the difference being board layout and the number of channels. Four user-installable option boards were available − parallel printer interface, RS-232 interface, GPIB interface and on-line notes in foreign languages. Tektronix also had a software package S43R101 that would run on IBM PC compatible machines. It used the RS-232 port to control the analyzer. A digitizing scope card could be installed with a 100 MS/s resolution on two channels 1230DSM. It was also available as a all in one package (1230D).
There was another variant, the 1230B. The only difference was that it had a self-contained internal rechargeable battery.
See the Microprocessor support table for microprocessor disassembly configuration options.
Key Specifications
| Probes | either P6442, P6443 or P6444 (16-channel) |
|---|---|
| Number of channels | 64 channels |
| CRT | 13 x 10 cm |
| Power | 90-250 V |
| Weight | 8.6 kg (19 lb.) (1230)
12.2 kg (29 lb.) (1230B) |
| Features |
|
Internals
The keypad switches have a tendency to become very "bouncy". See the "repair" tab.
Links
- MD's 1230 page
- Tek 1230 ROM dumps on MD's Tek 1230 page
- Tektronix training videos for the 1230 @ YouTube: Part 1 / Part 2
