P6440: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
The '''Tektronix P6440''' State Probe can be used with the [[1205]] Logic Analyzers.  
The '''Tektronix P6440''' State Probe can be used with the [[1205]] Logic Analyzers.  


It is a 24 channel data acquisition probe with 3 clocks/qualifiers and external trigger.  
It is a 24 channel data acquisition probe with 3 clocks/qualifiers and external trigger. It uses the 174-0752-00, 174-0763-00, and 174-0764-00 lead set.  


==Specifications==
==Specifications==

Revision as of 13:15, 23 June 2019

The Tektronix P6440 State Probe can be used with the 1205 Logic Analyzers.

It is a 24 channel data acquisition probe with 3 clocks/qualifiers and external trigger. It uses the 174-0752-00, 174-0763-00, and 174-0764-00 lead set.

Specifications

The probe is composed solely of TTL level integrated circuits. The construction of the probe is made of two board stacked on top of each other.

The pin-out of the probe is given. (looking from the front)

Notch Notch Notch
CLK 3 BIT 22 BIT 20 BIT 18 BIT 16 CLK 2 BIT 14 BIT 12 BIT 10 BIT 8 CLK 1 BIT 6 BIT 4 BIT 2 BIT 0
GND BIT 23 BIT 21 BIT 19 BIT 17 EXT TRIG BIT 15 BIT 13 BIT 11 BIT 9 GND BIT 7 BIT 5 BIT 3 BIT 1