TM503: Difference between revisions
No edit summary |
No edit summary |
||
Line 2: | Line 2: | ||
The '''Tektronix TM503''' is a 3-bay mainframe for the [[TM500 system]]. All bays are low-power. | The '''Tektronix TM503''' is a 3-bay mainframe for the [[TM500 system]]. All bays are low-power. | ||
The ''' | The '''TM503A''' has a swivelling carrying handle. | ||
The '''TM503B''' also allows the power supply/backplane part to be removed from the case so that modules to be repaired on the bench without using extenders (see link below). It also has openings for the [[TM5000]] GPIB feature, but not the connectors nor the power good signal for TM5000 plugins. | |||
==Option 2== | ==Option 2== |
Revision as of 04:03, 12 May 2019
The Tektronix TM503 is a 3-bay mainframe for the TM500 system. All bays are low-power.
The TM503A has a swivelling carrying handle.
The TM503B also allows the power supply/backplane part to be removed from the case so that modules to be repaired on the bench without using extenders (see link below). It also has openings for the TM5000 GPIB feature, but not the connectors nor the power good signal for TM5000 plugins.
Option 2
Option 2 adds internal pin headers for each slot as well as rear 50-pin and BNC connectors, allowing for custom wiring to, from and between plugins.
On the standard TM503, cutouts for three BNC sockets have been made in the rear frame, meaning that the user only needs to drill holes in the rear cover plate to install the sockets.
Manuals
Key Specifications
- please add
Links
Pictures
-
TM503 inside
-
TM503 backplane
-
TM503 PSU
-
Schematics
-
TM503 schematic
-
Block diagram
-
Interface connectors