TM5006: Difference between revisions
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
The '''Tektronix TM5006''' is a six-bay mainframe with a [[GPIB interface]] for the [[TM5000 system]]. | The '''Tektronix TM5006''' is a six-bay mainframe with a [[GPIB interface]] for the [[TM5000 system]]. | ||
The rightmost compartment can supply [[TM500 high-power compartments|high-powered plugins]]. | The rightmost compartment (slot 6) can supply [[TM500 high-power compartments|high-powered plugins]]. | ||
The DC rails to the plugins are provided by a switchmode PSU. The case has a cooling fan. | The DC rails to the plugins are provided by a switchmode PSU. DC rails are 8V 26V and -26V. The case has a cooling fan which is connected to the PRIMARY of the transformer. | ||
Available options include 02 Rear Inputs and 10 a set of 19-inch rackmount slides. | |||
For option 02 six rear BNC connectors and a 50 pin standard 50 pin female dsub connector will be installed on the rear panel. In addition internal pin headers will be soldered internally. No internal wiring is provided. | |||
The rack-mount kit has different sides compared to the standard model. It is not possible remove the standard carry handle to install a rack-mount kit. The entire side panel must be swapped. | |||
==Manuals== | ==Manuals== | ||
Revision as of 16:46, 13 March 2020
The Tektronix TM5006 is a six-bay mainframe with a GPIB interface for the TM5000 system.
The rightmost compartment (slot 6) can supply high-powered plugins.
The DC rails to the plugins are provided by a switchmode PSU. DC rails are 8V 26V and -26V. The case has a cooling fan which is connected to the PRIMARY of the transformer.
Available options include 02 Rear Inputs and 10 a set of 19-inch rackmount slides.
For option 02 six rear BNC connectors and a 50 pin standard 50 pin female dsub connector will be installed on the rear panel. In addition internal pin headers will be soldered internally. No internal wiring is provided.
The rack-mount kit has different sides compared to the standard model. It is not possible remove the standard carry handle to install a rack-mount kit. The entire side panel must be swapped.
Manuals
Specifications
please add
