H: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
inputs and has a switch to select between them. The rise time of the plug-in is 20 nanoseconds; bandwidth is 15MHz. | inputs and has a switch to select between them. The rise time of the plug-in is 20 nanoseconds; bandwidth is 15MHz. | ||
The sensitivity ranges from 5mV/cm to 20V/cm. A compromise, Type H is not as fast as Type [[B]], but it is DC-coupled on all ranges. | The sensitivity ranges from 5mV/cm to 20V/cm. A compromise, Type H is not as fast as Type [[B]], but it is DC-coupled on all ranges. | ||
Type H's use a [[Turret attenuators|turret attenuator]]. | Later Type H's use a [[Turret attenuators|turret attenuator]]. | ||
Type H with S/N less than 10,000 have ordinary attenuator. | Type H with S/N less than 10,000 have ordinary attenuator. | ||
Revision as of 08:35, 30 April 2012
The Tektronix Type H is a single-channel plug-in for 500-series scopes. It provides two inputs and has a switch to select between them. The rise time of the plug-in is 20 nanoseconds; bandwidth is 15MHz. The sensitivity ranges from 5mV/cm to 20V/cm. A compromise, Type H is not as fast as Type B, but it is DC-coupled on all ranges. Later Type H's use a turret attenuator. Type H with S/N less than 10,000 have ordinary attenuator.
Type 53/54H was introduced in 1958, along with the 533 and 543, renamed Type H in 1959, and dropped after 1970.
Manual needed (complete).
