AM501: Difference between revisions
Jump to navigation
Jump to search
Jaredcabot (talk | contribs) (Added info on AM501 Auxiliary Circuit Board Kit.) |
Jaredcabot (talk | contribs) mNo edit summary |
||
| Line 5: | Line 5: | ||
Also available was the accessory "AM501 Auxiliary Circuit Board Kit', Part number: 013-0146-00.<br> | Also available was the accessory "AM501 Auxiliary Circuit Board Kit', Part number: 013-0146-00.<br> | ||
Described as:<br> | Described as:<br> | ||
"The Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The PC board has six terminal studs that attach to the amplifier's banana jacks and is approximately 2.5-inches square. The designer can configure a network of components for use in conjunction with the AM 501's input, output, or feedback circuits." | "The Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The PC board has six terminal studs that attach to the amplifier's banana jacks and is approximately 2.5-inches square. The designer can configure a network of components for use in conjunction with the AM 501's input, output, or feedback circuits.<br> | ||
With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier." | |||
{{BeginSpecs}} | {{BeginSpecs}} | ||
Revision as of 08:46, 1 October 2021
The Tektronix AM501 is a 5 MHz operational amplifier plug-in for the TM500 system.
Also available was the accessory "AM501 Auxiliary Circuit Board Kit', Part number: 013-0146-00.
Described as:
"The Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The PC board has six terminal studs that attach to the amplifier's banana jacks and is approximately 2.5-inches square. The designer can configure a network of components for use in conjunction with the AM 501's input, output, or feedback circuits.
With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier."
Key Specifications
| Open Loop Gain | >10000 into an 800 Ω load |
|---|---|
| Common Mode Rejection Ratio | >10000:1 at 60 Hz |
| Unity Gain Bandwidth | >5 MHz into an 800 Ω load |
| Common Mode Input Voltage Range | ±40 V |
| Maximum Safe Differential Input Volatage | 80 V |
| Slew Rate | > 50 V/μs into an 800 Ω load |
| Output Voltage Range | > ±40 V |
| Output Current | > ±50 mA |
