TDS744A: Difference between revisions

Revision as of 05:35, 3 November 2021

Tektronix TDS744A

4-ch 500 MHz, 2 GS/s digital scope

Produced from 1995 to 1998?

Manuals

(All manuals in PDF format unless noted otherwise)

The TDS744 is a 500 MHz, 2 GS/s four-channel digital scope with a color screen.

Bandwidth	500 MHz at 10 mv/div and above; 500 MHz @ 5 mV/div; 500 MHz @ 2 mV/div; 450 MHz @ 1 mV/div
Sample rate	1 channel @ 2 GS/s, 2 channels @ 1 GS/s, 3 or 4 channels @ 500 MS/s
Resolution	8 bit
Record length	50k samples per channel (500k with option 1M)
Acquisition modes	sample, envelope, average, high-resolution, peak-detect
Display	Color; Zoom
Trigger modes	Edge, logic, pulse; Video trigger with option 05 (NTSC, SECAM, PAL, HDTV, and FlexFormat)
Storage	1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. NVRAM storage for saving waveforms, hardcopies, and setups. Units with option HD present (requires additional hardware) have a hard disk drive
I/O	Full GPIB programmability
Hardcopy	Using GPIB, RS-232, or Centronics ports

05 - Video Trigger - Oscilloscope comes with tools that allow investigation of a range of NTSC, PAL, SECAM, and high definition TV signals.
1M - 4M acquisition length - Extends standard acquisition length from 50,000 points per channel to 130,000 samples on three or four channels, 250,000 samples on two channels, and 500,000 samples on one channel.
13 - RS-232C and Centronics hardcopy interfaces - Add RS-232-C and Centronics interface ports.
1F - Floppy disk drive - Add 3.5 inch, 1.44 MByte floppy disc drive.
2F - Advanced DSP math - Add advanced DSP math features such as FFT, integration, and differentiation.
2C - Communication Signal Analyzer - Oscilloscope comes configured for communications signal triggering and mask testing.
3C - P6701B with system calibration - Oscilloscope comes with a P6701B and calibrated short-wavelength optical reference receiver on channel 1.
4C - P6703B with system calibration - Oscilloscope comes with a P6703B and calibrated long-wavelength optical reference receiver on channel 1.
2M - 8M acquisition length - TDS 520D, 724D: To 2M samples on two channels and 4M on one channel. TDS 540D, 580D, 714L, 754D, 784D, 794D: To 2M samples on three or four channels, 4M on two channels, and 8M samples on one channel (Option includes a hard disk and is only available for the models listed above.)

@@ Line 10: / Line 10: @@
 |designers=
 |manuals=
+* [[Media:061-4094-02.pdf|TDS, TLS & CTS FDD Replacement 061-4094-02]]
 * [[Media:070-8709-07.pdf|TDS400A/500A/600A/700A Programmer 070-8709-07]]
 * [[Media:070-8748-02.pdf|TDS Family Opt 05 Video Trigger Interface 070-8709-07]]
@@ Line 23: / Line 24: @@
 * [[Media:070-9719-00.pdf|TDS500B/600B/700A Digitizing Oscilloscopes 070-9719-00]]
 * [[Media:070-9721-02.pdf|TDS500B/600B/700A Service Manual 070-9721-02]]
+* [[Media:071-0375-00.pdf|TDXF2C, TDSXF3C, TDSXF4C, TDSXF1M2 & TDSXF1M4 Upgrades 071-0375-00]]
+* [[Media:071-0375-02.pdf|TDXF2C, TDSXF3C, TDSXF4C, TDSXF1M2 & TDSXF1M4 Upgrades 071-0375-02]]
+* [[Media:071-0442-02.pdf|TDS500C/500D/600C/700C,D,L HDD Upgrade 071-0442-02]]
 }}
 The '''TDS744''' is a 500 MHz, 2 GS/s four-channel digital scope with a color screen.