1,879
edits
No edit summary |
No edit summary |
||
Line 2: | Line 2: | ||
'''General Radio 874 (GR-874)''' connectors are hermaphroditic (asexual) coaxial RF connectors developed by [[wikipedia:Eduard Karplus|Eduard Karplus]] at [[General Radio]] in the late 1940s, initially for applications up to "4500 Mc" (4.5 GHz). | '''General Radio 874 (GR-874)''' connectors are hermaphroditic (asexual) coaxial RF connectors developed by [[wikipedia:Eduard Karplus|Eduard Karplus]] at [[General Radio]] in the late 1940s, initially for applications up to "4500 Mc" (4.5 GHz). | ||
GR-874 connectors are carefully engineered to keep a constant impedance throughout the signal path, by varying connector diameters between free-air and dielectrically supported sections. These connectors therefore exhibit very little reflection and are well suited for | GR-874 connectors are carefully engineered to keep a constant impedance throughout the signal path, by varying connector diameters between free-air and dielectrically supported sections. These connectors therefore exhibit very little reflection and are well suited for frequencies up to 9 GHz and pulse applications. For higher frequencies a smaller connector is required to avoid the excitation of wave guide modes. | ||
Most GR-874 connectors came in 50 Ω impedance. Versions for 75 Ω and 125 Ω were also available using the same ground shield and housing, but different (thinner) center pin geometry. The Tektronix [[519]] uses the 125 Ω GR-874 variant. | Most GR-874 connectors came in 50 Ω impedance. Versions for 75 Ω and 125 Ω were also available using the same ground shield and housing, but different (thinner) center pin geometry. The Tektronix [[519]] uses the 125 Ω GR-874 variant. | ||
Line 11: | Line 11: | ||
1000 V is typical. There are locking and non-locking versions. | 1000 V is typical. There are locking and non-locking versions. | ||
By the 1970s, GR-874 connectors were being supplanted by SMA connectors in test equipment, | By the 1970s, GR-874 connectors were being supplanted by SMA connectors in test equipment, see e.g. the progression from the [[S-1]] to the [[S-4]] sampling heads, also motivated by the higher bandwidth requirements. | ||
see e.g. the progression from the [[S-1]] to the [[S-4]] sampling heads. | |||
GR-874 connectors and adapters continue to be available through [http://www.ietlabs.com/gr874-connectors.html IET Labs], [http://www.mgs4u.com/RF-Microwave/General-Radio-GR-874.htm Max-Gain Systems], [https://www.pasternack.com/gr874-adapters-category.aspx Pasternack] and possibly others. | GR-874 connectors and adapters continue to be available through [http://www.ietlabs.com/gr874-connectors.html IET Labs], [http://www.mgs4u.com/RF-Microwave/General-Radio-GR-874.htm Max-Gain Systems], [https://www.pasternack.com/gr874-adapters-category.aspx Pasternack] and possibly others. |
edits