292: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
Tektronix Type 292 Semiconductor Tester Power Supply. | Tektronix Type 292 Semiconductor Tester Power Supply. | ||
The [[016-0057-00]] is the standard fixture for use with the 292. | |||
A 016-0058-00 board, intended for grounded Base circuit, is listed | |||
but not pictured in the 292 manual, and is never mentioned in any TEK | |||
catalog. | |||
A 016-0059-00 PCB for testing diodes is shown in the 292 manual. | |||
This diode test jig adapter was using a 013-0080-00 diode test jig. | |||
This test jig replaced the poorly working (bad contact) original TF-1 | |||
(017-0721) for the 291, together with a new adapter (017-0075-00). | |||
In some cases TF-1 have been made to work reliably by replacing the weak | |||
AlNiCo magnet is holding the axial leaded (magnetic) diode in place, by | |||
replacing it with a much stronger FeNdB magnet the same size | |||
(easily available on Ebay). | |||
* [http://w140.com/tek_292.pdf Tektronix 292 Manual (PDF)] | * [http://w140.com/tek_292.pdf Tektronix 292 Manual (PDF)] | ||
Revision as of 21:24, 17 January 2014
Tektronix Type 292 Semiconductor Tester Power Supply. The 016-0057-00 is the standard fixture for use with the 292. A 016-0058-00 board, intended for grounded Base circuit, is listed but not pictured in the 292 manual, and is never mentioned in any TEK catalog.
A 016-0059-00 PCB for testing diodes is shown in the 292 manual. This diode test jig adapter was using a 013-0080-00 diode test jig. This test jig replaced the poorly working (bad contact) original TF-1 (017-0721) for the 291, together with a new adapter (017-0075-00).
In some cases TF-1 have been made to work reliably by replacing the weak AlNiCo magnet is holding the axial leaded (magnetic) diode in place, by replacing it with a much stronger FeNdB magnet the same size (easily available on Ebay).
-
front photo
-
schematic
