P6460: Difference between revisions
Jump to navigation
Jump to search
DaveDaniel (talk | contribs) (Added use with the TM-5xx DP100 Digital Video Probe plug-in.) |
DaveDaniel (talk | contribs) m (Changed "for the TM-5xx" to "used in the TM500" to be consistent with other Wiki pages.) |
||
Line 1: | Line 1: | ||
[[File:P6460.JPG|P6460|300px|right]] | [[File:P6460.JPG|P6460|300px|right]] | ||
The '''Tektronix P6460''' Data Acquisition Probe may be used with [[DAS9200]], [[91A24]], [[91AE24]], [[1240D1]], or [[1240D2]] Logic Analyzers. It may also be used with and is required for the [[DP100]] Digital Video Probe plug-in | The '''Tektronix P6460''' Data Acquisition Probe may be used with [[DAS9200]], [[91A24]], [[91AE24]], [[1240D1]], or [[1240D2]] Logic Analyzers. It may also be used with and is required for the [[DP100]] Digital Video Probe plug-in used in the TM500 mainframes. | ||
The P6460 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs. | The P6460 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs. |
Revision as of 02:18, 6 November 2023
The Tektronix P6460 Data Acquisition Probe may be used with DAS9200, 91A24, 91AE24, 1240D1, or 1240D2 Logic Analyzers. It may also be used with and is required for the DP100 Digital Video Probe plug-in used in the TM500 mainframes.
The P6460 uses the P64xx-family 10-wire input lead harnesses with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
Key Specifications
Maximum Clock Frequency | ? |
---|---|
Data channel Bandwidth | 100 MHz |
Minimum Pulse Width | 4 ns |
Input Signal Level | -40 to +10 V above threshold (+30 V for RS232) |
Threshold Voltage | provided from Logic Analyzer |
Input Capacitance | 5 pF |
Non-destructive Input Voltage Range | ±40 V |
Maximum Voltage between any two Inputs | ±60 V |
Instructions
- P6460 Instructions incl. diagram and schematics (PDF,OCR)
- Service manual addendum (P6450,91A24 and 91AE24)(PDF, needs OCR)
- P6460 Instructions with July 1986 Update (incomplete, PDF, needs OCR)