3T6: Difference between revisions

Line 1:

The Tektronix Type 3T6 is a sampling plug-in for [[560-series scopes]]. It is particularly suited,

The Tektronix Type 3T6 is a [[sampling_oscilloscope|sampling]]

and programmable, when used in a [[568]]. In addition to the usual two 560-series connectors

plug-in for [[560-series scopes]]. It is particularly suited,

on the rear of the plug-in, the 3T6 has two extra connectors, J24 and P23. J24 is used for programming

and programmable, when used in a [[568]].

the 3T6. P23 is a coaxial feed of the trigger input signal. Both of these connectors mate with corresponding

In addition to the usual two 560-series connectors on the rear of the plug-in,

connectors in the 568.

the 3T6 has two extra connectors, J24 and P23.

J24 is used for programming the 3T6.

P23 is a coaxial feed of the trigger input signal.

Both of these connectors mate with corresponding connectors in the 568.

The 3T6 contains a digital delay that controls the time between

@@ Line 1: / Line 1: @@
-The Tektronix Type 3T6 is a sampling plug-in for [[560-series scopes]].  It is particularly suited,
+The Tektronix Type 3T6 is a [[sampling_oscilloscope|sampling]]
-and programmable, when used in a [[568]].  In addition to the usual two 560-series connectors
+plug-in for [[560-series scopes]].  It is particularly suited,
-on the rear of the plug-in, the 3T6 has two extra connectors, J24 and P23.  J24 is used for programming
+and programmable, when used in a [[568]].
-the 3T6.  P23 is a coaxial feed of the trigger input signal.  Both of these connectors mate with corresponding
+In addition to the usual two 560-series connectors on the rear of the plug-in,
-connectors in the 568.
+the 3T6 has two extra connectors, J24 and P23.
+J24 is used for programming the 3T6.
+P23 is a coaxial feed of the trigger input signal.
+Both of these connectors mate with corresponding connectors in the 568.
 The 3T6 contains a digital delay that controls the time between

Navigation menu