1A5: Difference between revisions
Jump to navigation
Jump to search
David Wise (talk | contribs) m (discontinued 1975 not 74) |
No edit summary |
||
| Line 17: | Line 17: | ||
==Specifications== | ==Specifications== | ||
Bandwidth is 50 MHz down to 5 mV/div. | Bandwidth is 50 MHz down to 5 mV/div. | ||
The maximum differential sensitivity is 1 mV/div, with a bandwidth of 40 MHz. | |||
Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20 MHz. | |||
Like most Tektronix differential plug-ins, it has three modes: V<sub>A</sub>-V<sub>C</sub>, V<sub>A</sub>-V<sub>B</sub>, and V<sub>C</sub>-V<sub>B</sub>. | Like most Tektronix differential plug-ins, it has three modes: | ||
V<sub>A</sub>-V<sub>C</sub>, V<sub>A</sub>-V<sub>B</sub>, and V<sub>C</sub>-V<sub>B</sub>. | |||
V<sub>C</sub> is controlled by a ten-turn potentiometer and can vary from -5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges). | |||
[[Category:Specifications needed]]''please add'' | [[Category:Specifications needed]]''please add'' | ||
| Line 26: | Line 30: | ||
<gallery> | <gallery> | ||
1a5 front.jpg | |||
1a5 right2.jpg | |||
1a5 right.jpg | |||
1a5 left.jpg | |||
</gallery> | </gallery> | ||
[[Category:500 series plugins]] | [[Category:500 series plugins]] | ||
Revision as of 06:55, 4 February 2018
Template:Plugin Sidebar 2 The Tektronix Type 1A5 is a differential amplifier plug-in for 500-series scopes.
There is a front-panel jack for direct connection of the Type P6046 Active Differential Probe.
Type 1A5 was introduced in 1967, replacing Types W and Z, and lasted until the end of the 500-series scope line.
Specifications
Bandwidth is 50 MHz down to 5 mV/div. The maximum differential sensitivity is 1 mV/div, with a bandwidth of 40 MHz. Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20 MHz.
Like most Tektronix differential plug-ins, it has three modes: VA-VC, VA-VB, and VC-VB. VC is controlled by a ten-turn potentiometer and can vary from -5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges).please add
