D: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 20: Line 20:
* http://bama.edebris.com/manuals/tek/d/
* http://bama.edebris.com/manuals/tek/d/
* http://w140.com/tek_fcp/tek_type_d_factory_cal_proc.pdf
* http://w140.com/tek_fcp/tek_type_d_factory_cal_proc.pdf
<gallery>
Image:D.jpeg
</gallery>

Revision as of 10:27, 16 April 2011

The Tektronix Type D is a plug-in for 500-series scopes.

It has high gain, and the bandwidth depends on the gain, ranging from 2MHz at 50mV/div and up, to 300kHz at 1mV/div. It displays the difference between two input signals, with a common-mode rejection ratio of 10,000. It has six tubes, on a shock-mounted subchassis to avoid microphonics.

Type D was introduced with the 531 and 535 in 1954 as Type 53D, was briefly renamed Type 53D/54D in 1955 with the introduction of the 541 and 545, then quickly renamed Type 53/54D, then shortened to Type D in 1959 with the introduction of the 5xxA scopes. Its last year was 1968.

Some production used a pair of 5814 tubes at the input while others used 12AU7's. These two tube types have different heater currents, and because the heaters are series-wired, you cannot switch from one type to the other without circuit modification.