11A16: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 18: | Line 18: | ||
or [[A6303]] probe (52.5 A continuous). | or [[A6303]] probe (52.5 A continuous). | ||
The current probe input is an [[Amphenol 165-12 connector]]. | The current probe input is an [[Amphenol 165-12 connector]]. | ||
It contains pins for hall element and transformer connections, | |||
lock detection, probe degaussing, and probe type encoding. | |||
The 11A16 detects the current probe type and scales the display appropriately. | |||
The 11A16 uses one [[M377]] amplifier chip per channel, U220 and U260. | |||
{{BeginSpecs}} | {{BeginSpecs}} |
Revision as of 11:35, 29 March 2018
Template:Plugin Sidebar 2 The Tektronix 11A16 is a dual-channel 120 MHz current amplifier for 11300-series, 11400-series, DSA-series, and some CSA-series mainframes, depending on the version of the firmware.
Each channel has a 12-pin input connector that fit the A6302 probe (10.5 A continuous) or A6303 probe (52.5 A continuous).
The current probe input is an Amphenol 165-12 connector. It contains pins for hall element and transformer connections, lock detection, probe degaussing, and probe type encoding. The 11A16 detects the current probe type and scales the display appropriately.
The 11A16 uses one M377 amplifier chip per channel, U220 and U260.
Key Specifications
— With A6302 probe — | |
Bandwidth | 50 MHz |
Deflection | 1 mA/Div to 2 A/Div, 1-2-5 |
Noise | 0.3 Div @ 1 mA/Div, 0.2 Div @ 2 mA/Div, 0.1 Div @ 5 mA/Div, 0.05 Div above |
— With A6303 probe — | |
Bandwidth | 15 MHz |
Deflection | 5 mA/Div to 10 A/Div, 1-2-5 |
Noise | 0.3 Div @ 5 mA/Div, 0.2 Div @ 10 mA/Div, 0.1 Div @ 25 mA/Div, 0.05 Div above |
Links
- 11A-series plug-in NVRAM replacement
- http://www.tek.com/datasheet/current-measurement-system-probes
- Tek 11A16 @ barrytech.com
- 015-0598-00 calibration fixture