H: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
* [http://w140.com/tek_type_h_ocr.pdf Tektronix Type H Manual (later, PDF)] | * [http://w140.com/tek_type_h_ocr.pdf Tektronix Type H Manual (later, PDF)] | ||
* [http://w140.com/tek_type_h_schematics.pdf Tektronix Type H Schematics Only (PDF)] | * [http://w140.com/tek_type_h_schematics.pdf Tektronix Type H Schematics Only (PDF)] | ||
* [http://w140.com/tek_fcp/tek_type_h_factory_cal_proc.pdf Tektronix Type H Factory Calibration Procedure (PDF)] | <!-- * [http://w140.com/tek_fcp/tek_type_h_factory_cal_proc.pdf Tektronix Type H Factory Calibration Procedure (PDF)] --> | ||
* [[Media:type_g_manual_110-008.pdf|Tektronix Type H Manual (sn 1102, PDF, OCR)]] | * [[Media:type_g_manual_110-008.pdf|Tektronix Type H Manual (sn 1102, PDF, OCR)]] | ||
Revision as of 15:55, 14 October 2018
Template:Plugin Sidebar 2 The Tektronix Type H is a single-channel plug-in for 500-series scopes. It provides two inputs and has a switch to select between them. The rise time of the plug-in is 20 ns, bandwidth is 15 MHz. The sensitivity ranges from 5 mV/cm to 20 V/cm. A design compromise, Type H is not as fast as Type B, but it is DC-coupled on all ranges.
Later Type H models use a turret attenuator. Type H with S/N less than 10,000 have ordinary attenuators.
Type 53/54H was introduced in 1958, along with the 533 and 543, renamed Type H in 1959, and dropped after 1970.
Pictures
-
-
-
-
-
-
-
Late model Type H with BNC inputs
