2224: Difference between revisions

Revision as of 09:47, 23 April 2019

{{{manufacturer}}}
100 MHz digital/analog scope Tek 2224 Produced from (?) to (?) Manuals 2232 manual applies mostly 2224 manual needed. Modifications 040-1344-00 CRT Noise Reduction (1991) (All manuals in PDF format unless noted otherwise)

The Tektronix 2224 is similar to the 2232, the differences being

some jumpers on the CPU board to tell the firmware it is a 2224 rather than a 2232
there are three front panel buttons on the 2232 which have no corresponding actuators or holes on the 2224
the 2224 is a 60 MHz scope; the 2232 is 100 MHz.

When working on a 2224, the 2232 manual can be used for most purposes.

@@ Line 14: / Line 14: @@
 </small>
 }}
-The '''Tektronix 2224''' is almost identical to the [[2232]], the differences being
+The '''Tektronix 2224''' is similar to the [[2232]], the differences being
-some jumpers on the CPU board to tell the firmware which model it is and
+* some jumpers on the CPU board to tell the firmware it is a 2224 rather than a 2232
-front panel buttons which have no actuators or holes on the 2224.  When
+* there are three front panel buttons on the 2232 which have no corresponding actuators or holes on the 2224
-working on a 2224, the [http://w140.com/mmm/tek-2232.pdf 2232 manual]
+* the 2224 is a 60 MHz scope; the 2232 is 100 MHz.
-can be used for most purposes.
+When working on a 2224,
+the [http://w140.com/mmm/tek-2232.pdf 2232 manual] can be used for most purposes.
 {{MissingSpecs}}