561: Difference between revisions

Revision as of 03:57, 4 June 2019

{{{manufacturer}}}

10(4) MHz "General Purpose Scope"

Produced from 1961 to 1974

Manuals

(All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 561 is a 560-series scope that was introduced in 1961 and produced in various versions well into the 1970s.

Versions

Over its life, the 561 was actually a series of four very different scopes, plus the rack mount versions of each.

561

The original 561 and RM561 were introduced in 1961. Similar to the 560, also introduced in 1961, the 561 has a round CRT. It supports the 50, 60 and 70 series of plug-ins, with the highest system bandwidth of 4 MHz. The 561 uses the T5032 CRT, which has a glass envelope.

561A

The short lived 561 was replaced by the 561A and the rack-mount version RM561A in 1962. The 561A were the highest selling model in the 560 series.

They introduced a revolutionary new CRT, the T5610, incorporating many “firsts” that would remain through most of Tek's analog scopes to follow – a rectangular faceplate allowing for a more compact CRT, and a ceramic CRT envelope which provided more mechanical precision than a blown glass tube. This also enabled the use of a separate face plate made from a flat glass panel that could have the graticule markings printed on the phosphor side of the faceplate, totally eliminating parallax errors, and allowing for better edge illumination.

The 561A supports all 2 and 3 series plug-ins. The popular 60 and 70 series plug-ins were renamed by adding a “2A, 2B, 3A, or 3B” in front to the two digit model number. New 3 series plug-ins were also added which consume more power than the original 60 and 70 series. Due to the higher power consumption, these newer plug-ins can not be used in the original 561. The highest bandwidth plug-ins gave a system bandwidth of 10 MHz.

The 561A was one of the mainframes offered for the Engine Analyzer package.

An RM561A with two custom plug-ins was incorporated (upside-down) as the standard display in the LINC computer.

561B

The 561B / RM561B were introduced in 1969. The B models actually provided no performance improvements over the 561A, with the change being limited to all solid state design, including the HV rectifiers. While this improves reliability of the mainframe, no all solid state plug-ins were ever designed. The 561B uses the same 2 and 3 series plug-ins used by the 561A.

561S

A special 561S was introduced as a special product, modified from a 561A. It did not appear in any Tek catalog. With special modified amplifier and time base (3A1S and 3B1S), and a special CRT (T5033), it achieved a 25 MHz system bandwidth, which is 2.5 times the bandwidth of a 561A.

The 3A1S and 3B1S were the only plug-ins that could be used in the 561S because the T5033 CRT has higher deflection sensitivity than the CRT used in the 561, 561A, and 561B. The vertical deflection sensitivity of the T5033 is 11.7 V/cm. The 561A has the T561 CRT which has a vertical deflection sensitivity of 19.5 V/cm.

The higher bandwidth of the 561S came at the expense of trading off some of the advances gained in the original 561A. The CRT is a conventional glass envelope, without internal graticule. Also, the scale was reduced from 8 × 10 divisions to 6 × 10. The 561S has no post-deflection acceleration, and a CRT cathode voltage of -3,300 V, like the other 561 models.

Key Specifications

	— 561 —
Bandwidth	DC to 4 MHz (with 3A75, may vary with other plug-ins)
Rise time	0.09 μs
Power Consumption	185 W with 72 & 67 plug-ins
	— 561A & 561B —
Bandwidth	DC to 15 MHz (with 3A5, may vary with other plug-ins)
Rise time	0.024 μs
Power Consumption	178 W with plug-ins
	— 561S —
Bandwidth	DC to 25 MHz (with 3A1S, may vary with other plug-ins)
Rise time	0.014 μs
Power Consumption	210 W to 240 W with plug-ins
	— all —
Line Voltage	105-125/210-250 V_AC ±10%, selected via primary voltage selector and voltage range selector switches, 50 Hz to 60 Hz.
Thermal Protection	Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level
Anode Potential	3.5 kV
Screen Area	8 cm × 10 cm ( 561S: 6 cm x 10 cm )
Construction	Aluminum alloy chassis. Anodized front panel

Links

561A @ museum-nt.de

Pictures of 561

Tek 561 with camera mount

Pictures of 561A

561A
561A
561A
Guernsey-made 561A with a 3L5 and a Guernsey-made 3B3
Guernsey-made 561A, rear view
561A (plug-in missing tubes)
561A
561A Low Voltage Power Supply
561A CRT Circuit

Pictures of 561B

561B
561B
561B
561B
561B with 3A7 and 3B4
561B trace
right inside
left inside
top inside

Pictures of 561S

Tek 561S
561S with 3A1S and 3B1S
561S rear
3A1S and 3B1S plugins

Pictures of RM561(A)

Tek RM561 with two Type 75 (3A75) amplifier plugins
Tek RM561A with 3A74 and 2B67 plugins
RM561A with 2A63 and 2B67
RM561A top inside
RM561A in LINC computer console

@@ Line 20: / Line 20: @@
 * [http://bama.edebris.com/download/tek/561a/561a.djvu Tektronix 561A Manual (BAMA, DjVu)]
 * [http://bama.edebris.com/download/tek/561b/561b.djvu Tektronix 561B Manual (BAMA, DjVu)]
-* [[Media:Tek 561a field recal proc sep 1962.pdf]]
+* [[Media:Tek 561a field recal proc sep 1962.pdf | Tektronix 561A Field Recalibration Procedure, September 1962 (PDF, needs OCR)]]
-* [[Media:Tek 561s fcp jan 1964.pdf]]
+* [[Media:Tek 561s fcp jan 1964.pdf | Tektronix 561S Factory Calibration Procedure, January 1964 (PDF, needs OCR)]]
 }}
 The '''Tektronix 561''' is a [[560-series_scopes|560-series scope]] that was [[introduced in 1961]] and