TDS754: Difference between revisions
(1 notice added, 1 notice deleted (wrong information)) |
No edit summary |
||
| Line 33: | Line 33: | ||
Importante notice for TDS700D Series: Checking of acquisition board variant is very important. Mixing of CPU Board with Firmware 7.xx with old Acquisition board is impossible. CPU board with Firmware 6.xx doesn't run with new acquisition board. | Importante notice for TDS700D Series: Checking of acquisition board variant is very important. Mixing of CPU Board with Firmware 7.xx with old Acquisition board is impossible. CPU board with old Firmware 6.xx doesn't run with new acquisition board. | ||
Revision as of 09:59, 23 November 2019
The Tektronix TDS754 is a 500 MHz, 4 GS/s quad-channel digital storage scope.
Key Specifications
| Bandwidth and Channels | 500 MHz; 2 Channels |
|---|---|
| Vertical Sensitivity | 1 mV to 10 V/div with calibrated fine adjustment |
| Time Base Range | 500 ps to 10 s/div |
| Sample Rate | 2.0 GS/s on 1 channel ; 2.0 GS/s on 2 channels ; 1 GS/s on 3 or 4 channels |
| Record Length | 50 K points each channel |
| Record Length (1M Option) | 500 K points on 1 channel; 250 k points on 2 channels ; 130 k points on 3 or 4 channels |
| Record Length (2M Option) | 8 M points on 1 channel; 4 M points on 2 channels ; 2 M points on 3 or 4 channels |
| Interface | GPIB standard ; RS-232 interface ; Centronics interface |
Links
- Conversion of 500 MHz TDS744A to 1 GHz TDS784A
- /Simmconn Labs LCD replacement kits for CRT-based TDS O-scopes
- EEVBlog Forum thread on TDS options and how to enable them
Internals
Note that the TDS754C&D and TDS784C&D series are nearly identical, with the differences being in front-panel cosmetics and the presence (754) or absence (784) of a few capacitors on the acquisition board. The only other difference is the position of instrument ID jumpers, also on the acquisition board. In fact, it is entirely possible to convert a 754 to a 784 (see abVe Links and the TDS784 page for more information).
Importante notice for TDS700D Series: Checking of acquisition board variant is very important. Mixing of CPU Board with Firmware 7.xx with old Acquisition board is impossible. CPU board with old Firmware 6.xx doesn't run with new acquisition board.
Pictures of TDS754C
-
TDS754C front
Pictures of TDS754D
-
TDS754D runs into DPO-mode
-
TDS754D Acquisition board, early model (SN B040000 below)
-
TDS754D Acquisition board, later model (SN B040000 upper), 2M option ready
Assembly part numbers
| Assy | Description | TDS754A P/N | TDS754C P/N | TDS754D P/N |
|---|---|---|---|---|
| A10 | Acquisition board | 671-1476-05 | 671–4039–01 | 679-4165-0x/679-4771-01 |
| A10 | Acquisition board (1M Opt.) | - | 671–4041–00 | 679-4166-0x/679-4771-01 |
| A10 | Acquisition board (2M Opt.) | - | - | 679-4771-01 |
| A11 | DRAM/CPU/Display board (inlc. 1M Opt.) | - | 671–4003–00 / 671–4172–00 | 671–4172–00 / 671-4349-00 |
| A11 | DRAM/CPU/Display board (only 2M Opt.) | - | - | - |
| A12 | Front panel assembly | - | 614–0937–02 | 614–0953–00 |
| A14 | D1 Bus | - | 671-2847-00 | 671-2847-00 |
| A14 | D1 Bus (Opt. 05) | - | 671-2848-00 | 671-2848-00 |
| A15 | Attenuator assembly | - | - | - |
| A16 | Power supply unit | - | 620–0063–04 | 620-0063-05 |
| A20 | CRT Display assembly | - | 640–0077–04 | 640–0077–11 |
| A23 | RS232/Centronics assembly | 640-2437-00 | 640-2437-00 | 640-2437-00 |