533: Difference between revisions
No edit summary |
No edit summary |
||
Line 60: | Line 60: | ||
==Pictures== | ==Pictures== | ||
===533=== | |||
<gallery> | |||
Tek 533 sn315 4.jpg|533 | |||
Tek 533 sn315 3.jpg|533 | |||
Tek 533 sn315 2.jpg|533 | |||
Tek 533 sn315 1.jpg|533 | |||
<!--Tek 533 sn315 5.jpg|533--> | |||
Tek 533 sn315 6.jpg|533 | |||
Tek 533 sn315 7.jpg|533 | |||
Tek 533 sn315 8.jpg|533 | |||
Tek 533 sn315 9.jpg|533 | |||
Tek 533 sn315 10.jpg|533 | |||
Tek 533 sn315 11.jpg|533 | |||
</gallery> | |||
===533A=== | |||
<gallery> | <gallery> | ||
2 533A.jpg| front from different 533A | 2 533A.jpg| front from different 533A | ||
Line 69: | Line 84: | ||
Tek 533a delay line 2.jpg|533A delay line | Tek 533a delay line 2.jpg|533A delay line | ||
</gallery> | </gallery> | ||
[[Category:500 series scopes]] | [[Category:500 series scopes]] |
Revision as of 11:10, 24 December 2019
The Tektronix Type 533 is a 15 MHz oscilloscope introduced in 1958
that uses letter-series and 1-series plug-ins.
It is similar to a 535, but without the second, delayed timebase. Instead, it has a range of horizontal magnifiers from ×2 to ×100.
There is also a rack-mount version, the RM33. Later 533A have BNC connectors. The standard CRT for the 533 and 533A is the T5330-2. Difference between 533 and 533A is only trigger mode.
Key Specifications
Bandwidth | DC to 15 MHz (≤ 3 dB) with Type K plug-in |
---|---|
Rise time | 0.024 μs |
Line Voltage | 108/115/122/216/230/244 VAC ±10%, selected via soldering wire on transformer, 50 Hz to 60 Hz |
Thermal Protection | Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level |
Power Consumption | 500 W with CA plug-in |
Cooling | AC Fan |
Trigger Modes (533) | AC/DC/AC Slow, and HF Sync |
Trigger Modes (533A) | AC/DC/AC LF Reject, and HF Sync |
Anode Potential | 10 kV |
Screen Area | 6 cm × 10 cm |
Construction | Aluminum alloy chassis. Anodized front panel |
Weight | 61.5 lbs / 27.8 kg |
Internals
The vertical amplifier consists of a 12BY7 differential amplifier followed by a 6DJ8 cathode-follower, followed by a 6197 differential (common-cathode) output stage that drives the 200 ns L-C delay line, which drives the vertical deflection plates of the CRT.
Trigger pickoff is taken after the cathode follower stage in the vertical amplifier. There is a 6DJ8 differential trigger pickoff amplifier followed by half of a 6DJ8 a cathode follower, buffering the trigger signal.
The trigger circuit is a 6DJ8 trigger amplifier followed by a 6DJ8 Schmitt trigger. Triggering can be from the internal pickoff or from an external signal or "line" trigger, from a 6.3 V tap on the power transformer.
The 533 contains a 53 °C (128 °F) thermal cutoff. The high voltages for the CRT, +8,650 V and −1,350 V, are generated by a 60 kHz Hartley power oscillator and five 5642 high-voltage rectifier diode tubes.
Pictures
533
-
533
-
533
-
533
-
533
-
533
-
533
-
533
-
533
-
533
-
533
533A
-
front from different 533A
-
533A front
-
533A rear
-
533A
-
533A delay line
-
533A delay line