7M11: Difference between revisions
No edit summary |
No edit summary |
||
Line 17: | Line 17: | ||
Image:7M11.jpg|Connectors were changed to BNC of adequate quality | Image:7M11.jpg|Connectors were changed to BNC of adequate quality | ||
File:Tek 7m11 front.jpg | File:Tek 7m11 front.jpg | ||
File:Tek 7m11 right.jpg | |||
</gallery> | </gallery> |
Revision as of 18:15, 1 November 2012
The Tektronix 7M11 is a plug-in which contains two independent 50 Ohm analog delay lines with 75 ns each. Risetime is specified as 175 ps maximum, and attenuation is fixed at two. A separate trigger output is available to eliminate an external power splitter and it is attenuated by a factor of five. The connections are 50-ohm GR-874.
The maximum signal allowed is +/- 5V. The mass of the 7M11 about 2.5kg, so be careful when sliding it into the slot. Generally Tektronix specifies not to ship mainframes with inserted plug-ins, to protect the bus connectors!
Because it is completely passive and has no bus contacts, it can be operated outside of the mainframe on the desk, freeing a slot for another plug-in.
-
Connectors were changed to BNC of adequate quality
-
-