AM501: Difference between revisions
Jaredcabot (talk | contribs) mNo edit summary |
Jaredcabot (talk | contribs) (Added picture and expanded description of AM501 Auxiliary Circuit Board Kit) |
||
| Line 5: | Line 5: | ||
Also available was the accessory "AM501 Auxiliary Circuit Board Kit', Part number: 013-0146-00.<br> | Also available was the accessory "AM501 Auxiliary Circuit Board Kit', Part number: 013-0146-00.<br> | ||
Described as:<br> | Described as:<br> | ||
"The Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The PC board has six terminal studs | "The AM501 Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The kit is a PC board has six terminal studs for attachment to the amplifier's banana jacks and is approximately 2.5-inches square. This permits the designer to build a circuit of resistors, capacitors, and other components for use in conjunction with the AM 501's input, output, or feedback circuits. With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier.<br> | ||
With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier." | An additional advantage of the kit is that it does not interfere with the other connectors on the face of the AM501." | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
| Line 27: | Line 27: | ||
Tek am501.jpg | Tek am501.jpg | ||
Tek-am501-side.jpg | Tek-am501-side.jpg | ||
AM501_Auxiliary_Circuit_Board_Kit.png | |||
</gallery> | </gallery> | ||
Revision as of 08:59, 1 October 2021
The Tektronix AM501 is a 5 MHz operational amplifier plug-in for the TM500 system.
Also available was the accessory "AM501 Auxiliary Circuit Board Kit', Part number: 013-0146-00.
Described as:
"The AM501 Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The kit is a PC board has six terminal studs for attachment to the amplifier's banana jacks and is approximately 2.5-inches square. This permits the designer to build a circuit of resistors, capacitors, and other components for use in conjunction with the AM 501's input, output, or feedback circuits. With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier.
An additional advantage of the kit is that it does not interfere with the other connectors on the face of the AM501."
Key Specifications
| Open Loop Gain | >10000 into an 800 Ω load |
|---|---|
| Common Mode Rejection Ratio | >10000:1 at 60 Hz |
| Unity Gain Bandwidth | >5 MHz into an 800 Ω load |
| Common Mode Input Voltage Range | ±40 V |
| Maximum Safe Differential Input Volatage | 80 V |
| Slew Rate | > 50 V/μs into an 800 Ω load |
| Output Voltage Range | > ±40 V |
| Output Current | > ±50 mA |
