292: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
mNo edit summary |
||
| Line 21: | Line 21: | ||
A [[016-0058-00]] board, intended for grounded base circuit, is listed but not pictured in the 292 manual, and is never mentioned in any TEK catalog. | A [[016-0058-00]] board, intended for grounded base circuit, is listed but not pictured in the 292 manual, and is never mentioned in any TEK catalog. | ||
A [[016-0059-00]] PCB for testing diodes is shown in the 292 manual. This diode test jig adapter was using a 013-0080-00 diode test jig. | A [[016-0059-00]] PCB for testing diodes is shown in the 292 manual. This diode test jig adapter was using a [[013-0080-00]] diode test jig. | ||
This diode test jig for the 292 is an alternative for the poorly working (bad contact) original [[TF-1]] (017-0721) for the [[291]], together with a new adapter ([[017-0075-00]]). | This diode test jig for the 292 is an alternative for the poorly working (bad contact) original [[TF-1]] (017-0721) for the [[291]], together with a new adapter ([[017-0075-00]]). | ||
Revision as of 07:23, 4 November 2023
The Tektronix Type 292 is a Semiconductor Tester Power Supply, to be used with a test fixture.
The 016-0057-00 is the standard fixture for use with the 292.
A 016-0058-00 board, intended for grounded base circuit, is listed but not pictured in the 292 manual, and is never mentioned in any TEK catalog.
A 016-0059-00 PCB for testing diodes is shown in the 292 manual. This diode test jig adapter was using a 013-0080-00 diode test jig. This diode test jig for the 292 is an alternative for the poorly working (bad contact) original TF-1 (017-0721) for the 291, together with a new adapter (017-0075-00).
Pictures
-
-
-
-
-
schematic
