291: Difference between revisions
mNo edit summary |
No edit summary |
||
| Line 23: | Line 23: | ||
<gallery> | <gallery> | ||
Tek 291 system.jpg | 291 with TF-1 adapter | Tek 291 system.jpg | 291 with TF-1 adapter | ||
Tektronix 291 tf1.jpg | TF-1 | Tektronix 291 tf1.jpg | TF-1 front | ||
Tek 291 tf1 rear.jpg | TF-1 rear | Tek 291 tf1 rear.jpg | TF-1 rear | ||
Tek 291 tf1 inside.jpg | TF-1 inside | Tek 291 tf1 inside.jpg | TF-1 inside | ||
Revision as of 07:48, 4 November 2023
The Tektronix 291 Diode Switching Time Tester Power Supply was introduced in 1963. The 291 uses the TF-1 test fixture.
TF-1 fixtures have been known to have issues with bad connections with the diode. In at least one case, a TF-1 has been made to work reliably by replacing the weak AlNiCo magnet that holds the axial leaded (magnetic) diode in place, by replacing it with a much stronger FeNdB magnet the same size (easily available on Ebay). The TF-1 was later superseded by an adapter 017-0075-00 to be used with the diode test jig 013-0075-00.
Pictures
-
291 with TF-1 adapter
-
TF-1 front
-
TF-1 rear
-
TF-1 inside
-
291 front
-
-
-
-
-
-
291 schematic
-
adapter 017-0075-00 and test jig 013-0080-00
-
adapter 017-0075-00 and test jig 013-0080-00
-
adapter 017-0075-00 and test jig 013-0080-00
