543: Difference between revisions

Revision as of 12:18, 4 May 2014

The Tektronix Type 543 is an all-tube 30MHz scope introduced in 1958. It takes letter-series and 1-series plug-ins. It is similar to a 545, but without the second, delayed timebase. Instead, it has a range of horizontal magnifiers from X2 to X100. It has the same six-stage balanced distributed amplifier (twelve 6DK6 tubes) as the 545. While the 545 has two non-calibrated X-input sensitivities, the 543 has an X-input with three calibrated selectable deflection sensitivities: 0.1V/cm, 1V/cm, and 10V/cm.

The standard CRT for the 543 is the T65 with P2 phosphor, part number 154-175. The standard CRT for the 543B is part number 154-0478-00, also known as the T5470-31-2.

The total acceleration voltage on the CRT is 10kV. The CRT power supply uses five 5642 HV tube diodes.

543B is a hybrid and vertical delay line have no 6DK6 and LC but 186 ohms delay line.

RM543B
RM543B side
543B
543B
543 Block Diagram
543 Horizontal Amplifier
543 Vertical Amplifier
543 Trigger
543 Timebase
543 Delay Line
543 CRT Circuit
543 Low-Voltage Power Supply
543 Calibrator

@@ Line 26: / Line 26: @@
 File:Tek_543b.jpg|543B
 File:Tek 543 b 2.jpg|543B
+File:Tek-543 block.png|543 Block Diagram
+File:Tek-543 horizontal amp.png|543 Horizontal Amplifier
+File:Tek-543 vertamp.png|543 Vertical Amplifier
+File:Tek-543 trigger.png|543 Trigger
+File:Tek-543 timebase gen.png|543 Timebase
+File:Tek-543 delay.png|543 Delay Line
+File:Tek-543 crt circuit.png|543 CRT Circuit
+File:Tek-543 lvps.png|543 Low-Voltage Power Supply
+File:Tek-543 calibrator.png|543 Calibrator
 </gallery>

543: Difference between revisions

Revision as of 12:18, 4 May 2014

Navigation menu