281
The Tektronix 281 TDR Pulser is an accessory that plugs into the probe power jack on 1S1, 3S1, and 4S1 plug-ins. It has two GR-874 connectors. One connector is intended to be connected to the input of a sampling oscilloscope. The other connector attaches to the cable that is being tested. The 281 periodically produces a pulse that is launched down a cable. The returning reflection is allowed to pass into the oscilloscope for measurement. The pulse is specified to be 460 mV, with a rise time of 750 ps or less, with a 5 μs pulse width.
The 281 uses a 1N3130 tunnel diode as a multivibrator. The multivibrator drives a common-base output transistor.
Manuals
Pictures
-
Entry in 1968 catalog
-
-
-
-
-
-
-
-
-
schematic
