7A15

Manuals – Specifications – Links – Pictures

The 7A15 is a single channel, 80 MHz general-purpose vertical amplifier for 7000-series scopes.

The AM-6565/U (aka 7A15N11) is the military version of this amplifier (without readout). A Department of the Army Technical Bulletin (see links section) suggests that it was used with the 7603 and its military version (the AN/USM 281C).

The 7A15A is a fully discrete design (i.e. no integrated circuits), built mostly from BJTs, with a 151-1032-00 dual JFET as the front-end buffer.

Key Specifications

Bandwidth	0 – 80 MHz (DC), 1 Hz – 80 MHz (AC)
Deflection	5 mV/Div to 10 V/Div in 1–2–5 sequence
Input impedance	1 MΩ // 20 pF
Features	×10 switch to extend sensitivity to 0.5 mV/Div (at 10 MHz bandwidth) Invert switch Probe ×10/Identify sensing input

Links

• 7A15 @ barrytech.com
• Zenwizard Studios - Tektronix 7A15A Calibration

Pictures

• 

  7A15A

• 

  7A15A

• 

  7A15A Rev 00

• 

  7A15A Rev 01

• 

  7A15A Revs compared readout board revs

• 

  AM-6565/U

• 

  AM-6565/U

• 

  AM-6565/U

• 

  AM-6565/U

• 

  Early 7A15

• 

  AM-6565/U front

• 

  Two PL-1186C in 7613

• 

  AM-6565/U right internal

• 

  AM-6565/U left internal