021-0374-00
Template:Plugin Sidebar 2 The Tektronix 021-0374-00 GPIB Decoder is a 7000-series plug-in designed to allow GPIB control of 7A16P or 7A29P programmable amplifiers and/or a 7B90P programmable time base module in a 7854 mainframe. (The manual warns that of all 7000 series mainframes, only the 7854 has adequate +5 V supply capacity.)
The -P type plugins were originally designed for the 7000 series digitizers like the 7912AD that have a built-in GPIB interface.
The 021-0374-00 replicates the functions of that interface, receiving commands from GPIB and translating them to the internal serial format expected by the plugins. It is based on a Motorola 6802 microcontroller and a TMS9914 GPIB interface chip.
The interface must be installed in the left horizontal (A timebase) bay. It addresses left vertical, right vertical and right horizontal plugins through GPIB sub-addresses 1, 2 and 3, respectively. Data connections from the 021-0374-00 the plugins require flat cables because the relevant bus lines are n/c on the 7854 backplane.
Links
Pictures
Mounting Procedure
Location of electrical components
-
A late version of the 7A16P plugin is needed
-
Location of the connectors for the GPIB decoder on a 7A16P
-
Right side of a 7A29P plugin
-
Location of the connectors for the GPIB decoder on a 7A29P
-
A late version of the 7B90P plugin is needed
-
Location of the connectors for the GPIB decoder on a 7B90P
-
Location of the zener diode V330 on a late 7B90P
-
Location of the connectors to the plugins on the GPIB decoder
Mechanical components
Firmware (uploaded BIN files)
| Part number | Location | Used in |
|---|---|---|
| 160-3533-00.bin (?) | U4060 | up to #B010190 |
| 160-3533-01.bin (?) | U4060 | #B010191 and newer |