317

{{{manufacturer}}}
10 MHz 3" tube scope Tek 317 Produced from 1959 to 1972 Manuals Tektronix Type 317 Manual (PDF) Tektronix 317 Manual (DJVU, BAMA, offline?) Tektronix 317 Factory Calibration Procedure (PDF) Tektronix 317 Factory Calibration Procedure (PDF, OCR) Tektronix 317 Instrument Reference Book (PDF, OCR) Media:Tek 317 fcp dec 1968.pdf (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 317, introduced in 1959, is a monolithic 10 MHz scope similar to the 316, but with higher acceleration voltage (9 kV versus 1.8 kV) on the CRT. It was intended for use where a bright display is needed. There is also a rackmount version, the RM17.

The 317 initially used UHF connectors for the signal input and calibrator output; later units use BNC connectors.

Type 317 Mod 101 operates on 50 to 400 Hz power and uses a DC fan motor.

Key Specifications

Deflection	0.1 V/div to 50 V/div, 1−2−5, and variable
Bandwidth	DC to 10 MHz (50/20/10 mV/div AC only)
Rise time	35 ns
Input	one channel, 1 MΩ // 38 pF input impedance
Sweep	200 ns/div to 2 s/div, 1−2−5, and variable
CRT	T317 CRT (154-0346-00), 9 kV acceleration