P6015

Manuals – Specifications – Links – Pictures

The Tektronix P6015 is a 1000× high-voltage probe usable up to 20 kV (40 kV peak pulse).

It can be operated with or without dielectric filling but without this filling, the maximum voltage is reduced to 13 kV (18 kV peak), similar to the P6013 predecessor model. The original filling material, Freon-114 aka Fluorocarbon 114 (R-114, CFC-114), is no longer available due to its ozone-depleting properties. For this reason, it was replaced by the P6015A in 1991, which uses a silicone based replacement.

The P6015 has a compensating circuit at the scope end of the cable with multiple adjustable RC constants, which was available with PL-259 or BNC plugs on the scope side (termination box part numbers 015-039/015-0039-00 and 015-049/015-0049-00, respectively).

Key Specifications

Bandwidth	75 MHz (10' cable), 25 MHz (25' cable)
Risetime	4.67 ns (10' cable), 14 ns (25' cable)
Attenuation	1000×
Input impedance	100 MΩ // 3 pF
Compensation range	15-50 pF
Max. input voltage	With dielectric filling: 20 kV DC or RMS to 100 kHz, pulse up to 40 kV (10%, < 0.1s) Without dielectric filling: 13 kV DC or RMS to 500 kHz, pulse up to 18 kV (10%, < 0.1s)

Links

• US Patent 3,256,484; High voltage test probe containing a part gas, part liquid dielectric fluid under pressure and having a transparent housing section for viewing the presence of the liquid therein. Paul V Terry, 1962.
• P6015 @ barrytech.com

Pictures

• 

  Tektronix P6015 in box

• 
• 
• 
• 
• 
• 
• 

  schematic
  old version

• 

  Derating curves

• 

  Can of Freon Dielectric Fluid

• 

  Termination box
  new version