4S2

Template:Plugin Sidebar 2 The Tektronix 4S2 is a two-channel sampling vertical plug-in for the 661. Signals enter the 4S2 through GR-874 connectors on the front panel. Unlike the 4S1, the 4S2's signal path does not contain a delay line between the input connector and the sampler. This has the advantage of maintaining higher pulse fidelity and thus higher bandwidth, but the disadvantage of making it impossible to see the leading edge of the triggering event unless a pre-trigger is used.

The 4S2, which was designed in 1963, uses a four-diode sampling bridge. The 4S2A, designed in 1965, uses a two-diode sampling bridge. This design change is discussed in the 4S2A Engineering Spec document linked below. The 4S2 does not provide trigger pick-off. The 4S2A provides trigger pick-off.

Key Specifications

Bandwidth	DC to 3.9 GHz
Rise time	90 ps
Deflection	2 mV/Div to 200 mV/Div, 1−2−5

Pictures

4S2
4S2
4S2
4S2
4S2A
42SA sampler schematic
42SA pulse generator schematic
4S2 Pulse Generator
4S2 Pulse Generator
4S2 Pulse Generator
4S2 Pulse Generator
4S2 Sampler
4S2 Sampler
AC Amplifier
AC Amplifier
Memory
Memory
Inverter
Inverter
Dual Trace
Dual Trace
4S2
4S2
4S2
4S2
4S2
4S2
4S2
4S2 Samplers
4S2 Top
4S2 Top Front
4S2 Top
Pulse Generator Card Removed, Var Gain Pots
4S2 Rear
4S2A Pulse Generator Front
4S2A Pulse Generator Rear
4S2A Gate (Sampler) Board