DAS9100

The Tektronix Digital Analysis 9100 is a Logic Analyzer system. It can have up to 104 acquisitions channels.

{{{manufacturer}}}
logic analyzer DAS 9100 Produced from 1982 to (?) Manuals DAS 9100 operator manual.pdf (Onsite) DAS 9100 Manuals (Offsite) (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The following cards where available for it: 91A04A, 91AE04A 91A08, 91A32, 91A24, 91AE24 91S16, 91S32, 91P16 and 91P32.

The analyzers had an optional DC100 tape drive. It was used to store Pattern generator menus, mnemonics menu and table, reference memory, and data acquisitions.

There was a also an IBM software package available (91DVS).

GPIB

The DAS9100 can operate via the GPIB port as either a talker or a listener. It is compatible with controllers such as the Tektronix 4041, 4051, 4052 and 4054.

RS-232C

The RS232 interface has two modes of operation. The first mode is almost the same as the GPIB mode. The controller commands the analyzer to perform functions using the same commands as for GPIB. The hardware interface works with standard modems. The second mode is a Master-Slave operation. Using another 9100 you can remotely control another 9100.

Composite output

The video out jack is part of option 02.

Key Specifications

please add