TDS714L

The Tektronix TDS714L is a 4 channel 500 MHz, 500 MS/s digital storage scope with a color screen.
The TDS714L is compatible with the Iomega Zip and Zip Plus Drive.

Tektronix TDS714L

4-ch 500 MHz, 500 MS/s digital scope

Produced from 1995? to 1998?

Manuals

Common

TDS714L

(All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

Key Specifications

Bandwidth	500 MHz
Sample rate	1 or 2 channels @ 500 MS/s
Number of Channels	4
Vertical Sensitivity	1 mV to 10 V/div with calibrated fine adjustment
Resolution	8 bit
Time Base Range	500 ps to 10 s/div
Record length	250K samples on 1 or two channels, 130K on 3 or 4 channels
Record Length (2M Option only)	8 M points on 1 channel; 4 M points on 2 channels ; 2 M points on 3 or 4 channels
Acquisition modes	sample, envelope, average, high-resolution, peak-detect
Display	Color; Zoom
Trigger modes	Edge, logic, pulse; Video trigger with option 05 (NTSC, SECAM, PAL, HDTV, and FlexFormat)
Storage	1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. NVRAM storage for saving waveforms, hardcopies, and setups. Units with option HD present (requires additional hardware) have a hard disk drive
I/O	Full GPIB programmability
Hardcopy	Using GPIB, RS-232, or Centronics ports, also compatible with Zip 100/250 disk drives

Software

TDS714L V1.129 Field Adjustment Software 063-3289-01 (ZIP)

Tektronix TDS300, 400, 500, 600, 700, 800 AWE Drivers 066-0087-00 (ZIP)
TDS runtime Environment TDSRTE1 (ZIP)
Telecom Test and I-Pattern Software TTiP 066-0119-00 (ZIP)
Enhanced Printing Utility for TDS Family 066-0125-00 (ZIP)
TDS runtime Environment TDSRTE1 066-0127-00 (ZIP)
Tektronix TDS500C/700C Custom Masks 066-0165-00 (ZIP)
Tektronix Wavestar 2012.05.09.11.07.29 16456 EN 066-0934-03 (ZIP, 102MB) Product Key: WSTRO618650124

Firmware

Options

05 - Video Trigger - Oscilloscope comes with tools that allow investigation of a range of NTSC, PAL, SECAM, and high definition TV signals.
13 - RS-232C and Centronics hardcopy interfaces - Add RS-232-C and Centronics interface ports.
1F - Floppy disk drive - Add 3.5 inch, 1.44 MByte floppy disc drive.
2M - 8M acquisition length - To 2M samples on three or four channels, 4M on two channels, and 8M samples on one channel.
HD - Hard Disk - 170Mb internal hard disk drive.

Optional Accessories

1K - Add K420 scope cart
1R - Rackmount kit
34 - P6247 differential probe
35 - P6243 active probe
36 - P6139A passive probe
C3 - Three years calibration
D1 - Calibration data report
D3 - Calibration data for C3

Standard Accessories

071-0130-XX - User Manual with Programmers Manual Help Disk
071-0628-XX - TDS714L Supplement
020-2313-XX - Reference
071-0630-XX - Technical Reference: Performance Verification and Specifications
P6139A - Probes: Four P6139A 10X, 500 MHz Passive probes
200-3696-01 - Front Cover
016-1268-00 - Accessory Pouch (only without Option 1R)
161-0230-01 - U.S. Power Cord

Optional Accessories

071-0627-XX - Service Manual
K420 - Oscilloscope Cart
016-1236-00 - Rack Mount Kit (for field conversion)
016-1268-00 - Accessory Pouch
016-0909-01 - Soft-Sided Carrying Case
016-1135-00 - Transit Case
012-0991-01 - GPIB Cable (1 meter)
012-0991-00 - GPIB Cable (2 meter)
012-1214-00 - Centronics Cable
012-1298-00 - RS-232 Cable

Links

See the Repairs page regarding HDD/FDD replacements.

Pictures

TDS714L Front
TDS714L Rear
TDS714L 3/4 View
TDS714L
TDS714L
TDS714L
Option 05 Internal Parts
Option HD Internal Parts, 2.5" Disk Version
Option HD Internal Parts, PCMCIA Disk Version